Set Up Procedure

Audikast Plus, TC418P, BTTC-418P-BLK, pairing with a bluetooth headphone, speakers, listening device, connecting

Step 1: Connect the Audikast Plus to a power source using the Micro-USB cable we provided, and flip the power switch to "ON." Step 2: Pairing your Headphones / Speaker to Audikast Plus. Please refer to THIS ARTICLE for a more detailed step-by-step...

While the Audikast Plus CAN be used with most AV Receiver, please DO NOT PLUG THE Audikast Plus INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.Step 1: Connect the Audikast Plus to a power source using...

The Audikast Plus transmitter supports Micro-USB digital audio input from your PC/Laptop. This delivers much better audio quality compared to the standard 3.5mm AUX port. Step 1: Connect the Audikast Plus to your PC/laptop. Take the GRAY Micro-USB ...

Step 1: Power ON both dongles by flipping their respective power switches to "ON" position. Please make sure that they are charged. You may refer to THIS ARTICLE if you're not sure how. Step 2: Allow the two dongles to reconnect with each other. ...

While the Lock CAN be used with most AV Receiver, please DO NOT PLUG THE Lock INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product. Step 1: Power ON both dongles by flipping their respective power switches...

Using the TX Dongle independently allows you to wireless stream audio (from a TV, an AV Receiver, Laptop etc.) into your Bluetooth Headphones/Speakers. Step 1: Connect the audio source (TV, AV Receiver, etc.) into the 3.5mm AUX port on the back of your...

Using the RX Dongle independently allows you to stream audio from a Bluetooth device into a wired (non-Bluetooth) headphone/speaker. Step 1: Connect your wired headphone/speaker to the 3.5mm AUX port on the back of your TX dongle. Step 2: Get the...

Step 1: Connect the transmitter dock to a power source using the power cable we provided. The transmitter dock will automatically power on, and the LED indicator labeled "TRANSMIT" on the front of the transmitter dock will start flashing GREEN. ...

While the HT380 CAN be used with most AV Receiver, please DO NOT PLUG THE HT380 INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product. Step 1: Connect the transmitter dock to a power source using the power...

No Bluetooth Icon on Native Win10 Computer Please search "Device Manager" from the  icon on task bar and open it. Expand "Bluetooth". DG40s should be displayed as "Generic Bluetooth Radio". Device Manager                            Status ...

Step 1: Connect the Transmitter to a power source using the Micro-USB cable we provided, and flip the power switch to "TX" position.   Step 2: Connecting the Headphones to the Transmitter. Turn the headphones on by Pressing & Holding the Multi...

While HT5006 CAN be used with most AV Receiver, please DO NOT PLUG THE HT5006 INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product. Step 1: Connect the Transmitter to a power source using the Micro-USB...

Bluetooth Icon is GRAY On Native Win10 Computer This indicates that you might have a driver conflict issue to solve. Please search "Add or remove program" from the  icon on task bar and open it. You can refer to image below. Typical conflicting drivers...

No Bluetooth Icon on Native Win10 Computer Please search "Device Manager" from the  icon on task bar and open it. Expand "Bluetooth". DG40sa should be displayed as "Generic Bluetooth Radio". Device Manager                            Status ...

DG40SA, BTDG-40S-BLKA, pairing with bluetooth xbox one controller, gaming controller, connecting, game

apple, airpods, pair, avantree, transmitter, Bluetooth, 2, how to, volume, change, adjust, too loud, lower, sound.

Step 1: Turn on both the Transmitter and the Receiver. Flip the power switch on both dongles to ON position, they will auto-connect with each other. Once connected, the LED indicator labeled "Audio" on both dongles will turn SOLID WHITE. Step 2...

Step 1: Turn on both the Transmitter and the Receiver. Flip the power switch on both dongles to ON position, they will auto-connect with each other. Once connected, the LED indicator labeled "Audio" on both dongles will turn SOLID WHITE. Step 2...

Bose, qc35, qc35iii, qc25, quietcomfort, quiet comfort, 700, soundsport, Bluetooth, headphones, earbuds, earphones, SoundLink, sound sport, link, mini II, free, transmitter, pair, connect, revolve, quietcontrol, qc30, revolve +, plus, color, smart noise cancelling, how to pair with avantree