How to Connect to Multiple Receiver Dongles

Each transmitter dongle can be linked with up to 4 receiver dongles simultaneously.

Step 1: Get the first TC240 set into Multilink Mode.

Flip the power switch on both the transmitter dongle and the receiver dongle to "Multilink" position. Give them a few seconds, they will auto connect. Once connected, their "AUDIO" indicator will both turn SOLID BLUE.

Step 2: Take another Receiver dongle, and get it into Pairing Mode.

Press & hold the "Pair" button on the side until the "Audio" LED starts to rapidly flash BLUE.

Step 3: Get the original Transmitter dongle into Pairing Mode as well.

Press & hold the "Pair" button on the side of the original (1st) transmitter dongle until the "Audio" LED indicator on it starts flashing BLUE rapidly.

Step 4: Give them a few seconds.

Once connected, the "Audio" LED indicator on both dongles will turn SOLID BLUE. Now, all three dongles in your hand should have their "Audio" indicator luminate SOLID BLUE.

Step 5 (Optional): Repeat the steps above.

If you'd like to connect with more receiver dongles, please repeats the steps above. You may connect with up to 4 receiver dongles at the same time.

If you have any question, please contact us at support@avantree.com.