The Ports on my TV are already Occupied but I’d Still Like to Connect TC419

Well, we got that covered!

What you need is a perfect fit for the TC419's "Bypass" function!

In short, the "Bypass" mode basically involves installing the TC419 between your TV and your sound system (Sound Bar, AV Receiver...)

This allows you to have the Sound System share the same TV port with the TC419 transmitter.

Setting up the Bypass Mode

Step 1: Connect the TC419 to a power source using the Micro-USB cable we provided.

Step 2: Connect the TC419 to your TV using one of the ports under the label "TX Input" located on the back of TC419.

Step 3: Connect the TC419 your Sound System (AV Receiver of SoundBar etc.) using one of the ports under the label "RX Output" located on the back of TC419.

Please make sure that you're using the same connection here as the connection you've used on the TX side. For instance, if you're using Optical Digital connection between your TV and your TC419, you'd have to use Optical Digital here as well.

Now, assuming that you've already paired your Headphones to your TC419 Plus beforehand, you're good to go! If you haven't done the pairing, please refer to THIS ARTICLE.

Ways to use the Bypass Function:

• Hearing only through the Headphones (Regular TX mode): Flip the TX/Bypass/RX switch to "TX" position.
• Hearing only through the Sound System: Flip the TX/Bypass/RX switch to "Bypass" position.
• Using the RX mode: Flip the RX/Bypass/RX switch to "RX" position.
  
  

More questions? Email us at support@avantree.com! We'll have someone assist you right away!