Part 1. Connect the Orbit to your TV / Audio Source

Step 1: Understand your TV/Audio Source Audio Output Options.

Please check which type of audio output port your Audio Source has. 

1. Digital Optical / SPDIF / TOSLINK port
2. 3.5mm / AUX / Headphone port
3. Red/White Audio Out port (Note1.1 must labeled "Audio OUT")

Step 2: Connect Orbit to a Power Source. 

You can use the micro USB cable provided to connect Orbit to a wall USB plug. Required power spec is 5V, 0.5A - 2A .(Contact us at support@avantree.com for a free wall-plug adapter if you need one.)

Note: TV's USB port works as power source as well, but it'll cause the dock to stop charging when you turn your TV off.

Step 3: Connect Orbit to TV via Audio Cable.

Option 1. Digital Optical/SPDIF/TOSLINK Connection - (Recommended!) 

Option 2. 3.5mm / AUX / Headphone Connection

Option 3. Red/White RCA Connection

Note 1.1 Must Labeled AUDIO OUT. Other red/white ports are audio in and not the right port to use.

Option 4. Microphone Input Connection

This option is recommended ONLY if you don't have any of the options listed above OR your TV is mounted on the wall and it is too difficult to get to the ports.

Step 4. (Optional) If you have a Sound Bar or AV Receiver...

You can connect your soundbar or AV receiver to the “To Speaker” ports on Orbit. More complicated connection set up, please refer to“How to use with my AV Receiver”.