Set Up Procedure

Step 1: Connect the TC417 to a power source using the Micro-USB cable we provided, and long-press the power button for about 3 seconds to power it ON. Step 2: Make sure that the TX/RX switch is at the "TX" position. The LED indicator should now...

Step 1: Connect the TC417 to a power source using the Micro-USB cable we provided, and long-press the power button for about 3 seconds to power it ON. Step 2: Make sure that the TX/RX switch is at the "RX" position. The LED indicator should now...

While TC417 CAN be used with most AV Receiver, please DO NOT PLUG THE TC417 INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product. Step 1: Connect the TC417 to a power source using the Micro-USB cable we...

Step 1: Connect the Oasis to a power source using the Micro-USB cable we provided, and flip the Power Switch to "Bluetooth." Step 2: Flip the TX/RX switch to "TX" position. Step 3: Pairing your Headphones / Speaker to Oasis. Please refer to ...

While Oasis CAN be used with most AV Receiver, please DO NOT PLUG THE OASIS INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product. Step 1: Connect the Oasis to a power source using the Micro-USB cable we...

Audikast, BTTC-418-BLK, TC418, headphone, pairing with, connecting to, Bluetooth, speaker, devices, dual connection, two headphones, 2 speakers, reconnecting.

Step 1: Pairing the First Device. Please pair the first device to Audikast. If you're not sure how, you may either refer to THIS ARTICLE, or one of the Video Tutorials below. Step 2: Getting the Audikast into Bluetooth Pairing Mode again. Press &...

There's no need to re-pair the Audikast each time. The Audikast automatically reconnects to the MOST RECENTLY PAIRED device, given that both the Audikast and the device have been turned ON. It may take up to 20 seconds or so to reconnect, please be ...

While the Audikast CAN be used with most AV Receiver, please DO NOT PLUG THE Audikast INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.Step 1: Connect the Audikast to a power source using the Micro-...

The Audikast transmitter supports Micro-USB digital audio input from your PC/Laptop. This delivers much better audio quality compared to the standard 3.5mm AUX port. Step 1: Connect the Audikast to your PC/laptop. Take the GRAY Micro-USB Cable that...

Step 1: Connect the Priva III to a power source using the Micro-USB cable we provided, and flip the power switch to "ON." Step 2: Getting the Priva III into "Bluetooth Pairing Mode." First-Time Use: If the Priva III is brand new, and this is ...

Step 1: Pairing the First Device. Please pair the first device to Priva III. If you're not sure how, you may either refer to THIS ARTICLE, or one of the Video Tutorials below. Step 2: Getting the Priva III into Bluetooth Pairing Mode again. Press...

While the Priva III CAN be used with most AV Receiver, please DO NOT PLUG THE Priva III INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.Step 1: Connect the Priva III to a power source using the Micro...

The Priva III transmitter supports Micro-USB digital audio input from your PC/Laptop. This delivers much better audio quality compared to the standard 3.5mm AUX port. Step 1: Connect the Priva III to your PC/laptop. Take the GRAY Micro-USB Cable that...

There's no need to re-pair the Prova III each time. The Priva III automatically reconnects to the MOST RECENTLY PAIRED device, given that both the Priva III and the device have been turned ON. It may take up to 20 seconds or so to reconnect, please ...

Step 1: Connect the transmitter to a power source using the Micro-USB cable we provided, and flip the power switch to "ON." Step 2: Power up the headphones that came with the HT4189 set by long-pressing the middle (silver) button on the headphones...

Step 1: Adjust the Audio Settings on your PS4. Go to Audio Devices. Make sure both “Input Device” and “Output Device” are set to "Avantree **Device Name**" Now you can hear the game background music and control the volume through the controller. ...

Important Note: Please make sure that the firmware of your Nintendo Switch is updated to 4.0.0 or above. Bluetooth headphones were not supported on previous versions of the Switch. Using with the Nintendo Switch Dock. Step 1: Plug the Adapter into ...

Step 1: Adjust the Audio Settings on your Mac. In the top bar, click on the speaker icon and switch the output device to "Avantree **Device Name**" Step 2 (Optional): If you'd like to use Microphone. In your sound preferences, also located in the...

While the HT4186 CAN be used with most AV Receiver, please DO NOT PLUG THE HT4186 INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.Step 1: Connect the transmitter to a power source using the Micro-USB...