How to Enter Bluetooth Pairing Mode
Step 1: Plug the SP750 into a power source.
Step 2: Entering Pairing Mode on the SP750 speaker.
Twist the power/volume dial clockwise to turn the SP750 on. Then press and hold the MFB for about two seconds until the LED begins to flash BLUE. The SP750 is now in pairing mode.
Power/Volume dial: | MFB: |
Step 3: Connect the Speaker.
In the Bluetooth settings, locate "Avantree SP750". If the speaker is in pairing mode, it should say "Ready to pair" underneath "Avantree SP750. Click "Pair" to connect the speaker.
On your computer, there may be a pop-up indicating that you are connected. Otherwise, you can check the Bluetooth settings and "Avantree SP750" should appear as connected.