Connecting to an AV Receiver
While Oasis Plus CAN be used with most AV Receiver, please DO NOT PLUG THE OASIS PLUS INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.
Step 1: Connect the Oasis Plus to a power source using the Micro-USB cable we provided, and flip the power switch to "TX" position.
Step 2: Pairing your Headphones / Speaker to Oasis Plus.
Please refer to THIS ARTICLE for a more detailed step-by-step instruction.
Step 3: Connecting to AV Receiver
There are 2 ways to connect the Oasis plus to your AV Receiver: DIGITAL OPTICAL OUT, or PHONES.
- Option A - DIGITAL OPTICAL
- Take the Optical Cable that we provided in the box, and plug one end of it into the "Digital Audio Out" or "Optical Out" port on the back of your AV Receiver.
- Plug the other end of the cable into the BLACK Optical Port on the back of your Oasis Plus transmitter.
- Make sure that the "OPT" indicator on Oasis Plus is now SOLID WHITE. If not, press the "AUX/OPT" button once (2019 version only. Pre-2019 version auto-changes.)
- Option B - PHONES (Usually on the front of the AV Receiver)
- Take the 3.5mm Auxiliary Cable that we provided in the box, and plug one end of it into the PHONES Port on your AV Receiver. You'll need to use a 6.35mm to 3.5mm converter here (needs to be purchased separately.)
- Plug the other end of the cable into the AUX Port next to the Antenna (the one closer to the BLACK Optical Port) on the back of your Oasis Plus transmitter.
- Make sure that the "AUX" indicator on Oasis Plus is now SOLID WHITE. If not, press the "AUX/OPT" button once (2019 version only. Pre-2019 version auto-changes.)
-
For more questions, please send us an email at support@avantree.com, we'll have someone assist you as soon as possible.