Connecting to a TV
Step 1: Power ON both dongles by flipping their respective power switches to "ON" position.
Please make sure that they are charged. You may refer to THIS ARTICLE if you're not sure how.
Step 2: Allow the two dongles to reconnect with each other.
Just keep them close to each other and give them a few seconds. Once connected, the LED indicator on the TX dongle will DOUBLE-FLASH WHITE while the indicator on the RX dongle DOUBLE-FLASHES BLUE.
Step 3: Connect a Wired Headphone / Speaker to the RX dongle.
Plug the Headphone / Speaker into the 3.5mm (AUX) port on the RX dongle.
Step 4: Connect the TX dongle to your TV.
The Lock supports Auxiliary (3.5mm,) and RCA (RED/WHITE.) Please check and see which one your TV supports; any ONE of the two will work.
- Option A - Auxiliary (3.5mm)
- Take the 3.5mm Auxiliary Cable that we provided in the box, and plug one end of it into the "HEADSET" or "3.5mm AUDIO OUT" port on the back of your TV.
- Plug the other end of the cable into the AUX port on your TX dongle.
- Go to your TV's SOUND settings, make sure that the AUDIO OUTPUT has been set to "HEADSET." Some TVs automatically complete this step for you, some don't.
- Option B - RCA (RED / WHITE)
- Please note that ONLY the ones that are labeled "AUDIO OUT" can be used; the other ones won't work.
- Plug the RED/WHITE end of the RCA-AUX Converter Cable into the RCA AUDIO OUT port on the back of your TV.
- Take the 3.5mm Auxiliary Cable, and plug it into the BLACK end of the RCA-AUX Converter Cable.
- Plug the other end of the 3.5mm Auxiliary Cable into the AUX port on the back of your TX dongle.
- Go to your TV's SOUND settings, make sure that the AUDIO OUTPUT has been set to "EXTERNAL SPEAKER." Some TVs automatically complete this step for you, some don't.
Now you should be good to go! If not, please feel free to email us at support@avantree.com, we'll have someone assist you with your set up.