How to PAIR, CONNECT and LOCK with the transmitter in Opera?

The headphones and the transmitter in the OPERA set are "factory locked." This means that they should automatically connect with each other right out of the box (with both devices turned on, of course.)

If they don't, please follow the steps below to troubleshoot.

Step 1: Clear the pairing history of the Opera headphones.

After turning on, Press and hold both “+” and “-“ for 6 seconds until the RED and BLUE LEDs are on SIMULTANEOUSLY for 2 seconds (may look PINK), then release your hands. Now the pairing history of the headphones has been cleared. It will enter pairing mode automatically with the LED flashing RED and BLUE alternately.

Step 2: Clear the pairing history of the Opera Transmitter.

Enter the transmitter into PAIRING mode –Slide the power button to Bluetooth icon for 2 seconds, LED indicator(at the front of the transmitter) starts flashing RED and BLUE alternately. Then Slide to Bluetooth icon again for 5 seconds, LED indicator will stay RED and BLUE SIMULTANEOUSLY for 5 seconds (may look PINK), then clear all paired history of the transmitter.

Give them a few seconds;they should reconnect with each other.

Step 3: Lock them together again.

After the headphone is connected to the transmitter, hold the LOCK button on the transmitter for 10S until the RED and BLUE LEDs at the front of the transmitter are on SIMULTANEOUSLY for 5 seconds (may look PINK) to LOCK them. Once connected, the LED indicator on both devices will turn SOLID BLUE.

Now they are locked, each time you turn on them, the transmitter will always auto reconnect to this headphones.