How to Add Two or More Headphones onto HT380

You CAN add a 2nd pair of headphones (neck-loop receiver) to HT380 and share the audio with a partner, BUT you can ONLY do so with one from another HT380 set; the other headphones will NOT work. You can repeat this procedure and connect with up to 100 HT380 headphones.

Step 1: Turn OFF or UNPLUG the 2nd HT380 Set.

Step 2: Turn the 1st HT380 Set ON (both the neck-loop receiver AND the transmitter dock.)

Step 3: Turn OFF the 1st HT380 Set (both the neck-loop receiver AND the transmitter dock.)

Yes, we know this is quite annoying, but please bear with us for a little longer.

Step 4: Get the neck-loop receiver from the 2nd HT380 set into PAIRING MODE.

Press & Hold the big grey "Ambient" button on the receiver for 5 seconds until you see the LED indicator on it flashing YELLOW-GREEN.

Step 5 (Optional): If you'd like to Connect more than 2 Neck-Loop Receivers.

Please repeat Step 4 on all the Receivers you'd like to connect.

Step 6: Get the transmitter from the 1st HT380 set into PAIRING MODE.

Turn the transmitter dock from the 1st HT380 set ON (ONLY the transmitter. Keep the receiver OFF.) It will enter pairing mode and the "transmit" indicator on transmitter will start flashing GREEN.

Step 7: Give them a few seconds to connect.

Once connected, the LED indicator on receiver will turn SOLID YELLOW-GREEN.

And voila! You now have two or more headphones both connected to the 1st transmitter.

If you're still having trouble with this, please contact us at support@avantree.com.