Alto Solo - Power & Charging Related

If you can hear the voice prompt say “Low battery” or see the LED indicator blinking RED, you need to charge your headset.

The Alto Solo headset can be charged with either the Desktop Charging Stand or with a USB-C cable.

Option 1: Using the Desktop Charging Stand

Use the included USB-C charging cable to connect the charging stand to a power source. Then, place the headset on the stand as directed in the image below. The earcup goes into the stand. Make sure that the charging pins are aligned properly.

The LED indicator on the charging stand will remain RED while charging and turn OFF when charging is complete.

Option 2: Using the USB-C Cable

Insert the USB-C cable into the Type C port on the headset and connect the other end to a power source.

The LED indicator on the headset will turn SOLID RED while charging and turn off when complete. It takes roughly 2-3 hours to fully charge the headset.

NOTE: The Alto Solo’s battery life is about 20 hours on a full charge.