Part 2. Wireless Headphone and Transmitter Base Are Connected

Note 2.1 The Headphones and the transmitter base in this set are "Factory Locked." You don't need to manually pair them each time. All you need to do is turn both of them on and they should automatically connect within 2-5 sec.

Step 1. Power the Headphones ON.

For Batches before TT2F1 (How to find the batch no.): Press & Hold the Power/MFB Button on the headphones until the indicator lights up. It should be flashing BLUE. 

Batches T22F1 and after: Slide the power switch to the "ON" position. The indicator should be flashing BLUE.

Step 2. Power the Transmitter ON.

Flip the Power Switch on the Transmitter to ON and wait for a few seconds. The headphones and transmitter should automatically connect with each other. Note 2.2 Once connected, the Bluetooth LED next to "1"/"A" on the transmitter will turn SOLID BLUE. The headphones' LED will also turn SOLID BLUE and you'll also hear "CONNECTED" through the Headphones.

If this is not the case, please turn both devices off, then turn them back on again and wait for 5-10 seconds.

If they still don't connect, you might need to manually Re-pair, Connect, and Lock the headphone and transmitter base again. 

You can also connect a 2nd Headphone to transmitter.

Once you've succesfully connected the headphones, the next step is to Adjust the TV Audio Settings