Part 2. Power On & Connect the Headphone to the Transmitter

Note2.1 : The Headphones and the transmitter base in the SET are "Factory Locked." You don't need to manually pair them each time. All you need to do is turning both on and they should automatically connect within 2-5 sec.

Step 1. Connect the transmitter dock to a power source. DO NOT turn on the transmitter yet.

Plug the provided USB cable into the DC IN port. The other end of the cable should go into the power source.

The required power source for the charging base is 5V, 1-2A. You can use most of the cellphone wall charger OR the TV USB port. A USB wall plug is the recommended option here becaue TV USB power goes off with TV and you will not be able to charge the headphone when not in use. 

Most people do have spare USB power plug at home so that is not in-box. However, if you do need a power plug for this, we can send you a US / EU / UK type free of charge. Simply drop an email to support@avantree.com.

Step 2. Power on the headphones and the transmitter as the following instruction. Then they should automatically connect with each other.

Note 2.1: For newer batch units, once connected, the headphone shows SOLID BLUE. The "Power/Charging/Connection" and either the "AUX" or "OPT" indicator (depending on your connection) on the transmitter are SOLID BLUE too. 

Note2.2: For older batch units, once connected, headphone shows SOLID BLUE. The "Power/Charging/Connection" and "LL" indicator on the transmitter are SOLID BLUE too.