Connecting to an AV Receiver

While TC419 CAN be used with most AV Receiver, please DO NOT PLUG THE TC419 INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.

Step 1: Connect the TC419 to a power source using the Micro-USB cable we provided, and flip the Power Switch to "TX."

Step 2: If it didn't power ON automatically...

Press & Hold the Power button for a couple seconds to turn it on.

Step 3: Pairing your Headphones / Speaker to TC419.

Please refer to THIS ARTICLE for a more detailed step-by-step instruction.

Step 4: Connecting to AV Receiver.

There are 2 ways to connect the Oasis to your AV Receiver: DIGITAL OPTICAL OUT, or PHONES.

• Option A - DIGITAL OPTICAL
  • Take the Optical Cable that we provided in the box, and plug one end of it into the "Digital Audio Out" or "Optical Out" port on the back of your AV Receiver.
  • 
  • Plug the other end of the cable into the TX-Side Optical Port on the back of your TC419 transmitter.
  • 
  • Make sure that the "OPT" indicator on TC419 is now SOLID WHITE. If not, press the "AUX/OPT" button once.
  • 
• Option B - PHONES (Usually on the front of the AV Receiver)
  • Take the 3.5mm Auxiliary Cable that we provided in the box, and plug one end of it into the PHONES Port on your AV Receiver. You'll need to use a 6.35mm to 3.5mm converter here (needs to be purchased separately.)
  •  
  • Plug the other end of the cable into the TX-Side AUX Port on the back of your TC419 transmitter.
  • 
  • Make sure that the "AUX" indicator on Oasis is now SOLID WHITE. If not, press the "AUX/OPT" button once.
  • 
    
    

For more questions, please send us an email at support@avantree.com, we'll have someone assist you as soon as possible.