How to PAIR, CONNECT and LOCK the earbuds with the transmitter in HT4106?
The eabruds and the transmitter in the HT4130 set are "factory locked." This means that they should automatically connect with each other right out of the box (with both devices turned on, of course.)
If they fail to connect, please try to click the button once. If they still cannot reconnect, please follow the steps below to RECONNECT and LOCK them again.
1. Get the Avantree Audikast Plus transmitter into Pairing Mode
- Connect the Audikast Plus to a power source and turn it on.
- Press & Hold the button until you see the Bluetooth indicator flashing RED & BLUE.
2. Get the earbuds into Pairing Mode.
- Open the charging case and remove the earbuds from the case.
- One earbud will enter PAIRING mode with the LED flashing BLUE.
3. Wait for them to Connect. Once connected, the Bluetooth icon on the transmitter close to will turn solid BLUE ; you will hear “Connected” from the earbuds.
4. Lock them up again - Press & hold the button on the transmitter for about 10 seconds until the indicator turns PINK for a couple seconds. Then the transmitter and the speaker are LOCKED and will always link to each other once turned on.