Part 1. Connect Oasis to your TV / Audio Source

Step 1. Understand your TV/Audio Source Audio Output Options.

Please check which type of audio output port your Audio Source has. 

1. Digital Optical / SPDIF / TOSLINK port

2. 3.5mm / AUX / Headphone port

3. Red/White Audio Out port

Note 1.1 Valid RCA port must labeled "Audio OUT"

Step 2. Connect Oasis transmitter to a Power Source, and flip the Power Switch to "Bluetooth."

Plug the provided USB cable into the DC IN port. The other end of the cable should go into the power source.

The required power source for the charging base is 5V, 0.5A - 2A. You can use most of the cellphone wall charger OR the TV USB port. TV USB port is recommended because it allows your transmitter on / off automatically with your TV. 

Most people do have spare USB power plug at home so that is not in-box. However, if you do need a power plug for this, we can send you a US / EU / UK type free of charge. Simply drop an email to support@avantree.com.

Step 3.  Flip the TX/RX switch to "TX" position. 

Step 4 Connect Oasis transmitter Adapter to TV via Audio Cable.

Option 1. Digital Optical (a.k.a SPDIF or TOSLINK) Connection - (Recommended!) 

Option 2. 3.5mm AUX (a.k.a. HEADPHONES Jack)

Option 3. Red/White RCA

Step 5 (Optional): If you have a Sound Bar or AV Receiver...

You can connect your soundbar or AV receiver to the “To Speaker” ports on Oasis transmitter.

TV Digital Out <- Optical Cable -> Oasis TX Input from TV Optical Port (black) / Oasis Bypass Output to Speaker Optical Port (Gray) <- Optical Cable -> Sound bar Optical In 

More complicated connection set up, please refer to“How to use with my AV eceiver”.

Note 1.2 Input & Output must be the SAME type of cable connection.