Part 2: Power On & Connect the Headphone to the Transmitter

Note: The Headphones and the transmitter base in this set are "Factory Locked." You don't need to manually pair them each time. All you need to do is turn both of them on and they should automatically connect within 2-5 sec.

Step 1. Connect the transmitter dock to a power source. DO NOT turn on the transmitter yet.

Plug the provided USB cable into the DC IN port. The other end of the cable should go into the power source. You can use a USB port such as the one on your TV, however, we recommend using the included USB wall plug because the TV USB power goes off with the TV, and you will not be able to charge the headphones when not in use.

Step 2. Power on the transmitter

Use the power switch at the front of the transmitter to power it on.

Step 3. Remove the headphones from the charging dock

Step 4. Keep them close together and wait

They should automatically connect within 2-5 seconds, and the “1” LED on the transmitter will turn solid BLUE.