Oasis Overview-Buttons & Indicators
Categories
Oasis Overview-Buttons & Indicators
Oasis buttons:
Oasis LED indicator as below -
| Status | LED indicator | Voice Prompt | Image |
| TX - Pairing | "TX" LED flashes GREEN and WHITE alternately | Pairing mode - Please put your device into pairing mode and wait. |  |
| RX - Pairing | "RX" LED flashes GREEN and WHITE alternately | Pairing mode - Please put your device into pairing mode and wait. |  |
| Single connected | LED A will light up. | Connected. Ready for use. |  |
| Dual link Connected | LED A and B will light up. | Connected. Ready for use. |  |
| TX reconnected | "TX" LED flashes WHITE | Reconnecting to the last paired device. |  |
| RX reconnected | "RX" LED flashes WHITE | Reconnecting to the last paired device. |  |
| Bypass(directly cable connection) | LED" "is on | Power on. Bypass mode. Please ensure the correct input/output mode is set. |  |
| Connected with device using SBC (or APTX or aptX low latency) codec | SBC(or APTX or LL) will be on | / |  |
|
Optical cable is plugged in and switch to OPT |
"OPT" LED is on | Optical mode. Please ensure optical cable is connected. |  |
|
Aux cable is plugged in and switch to AUX
|
"AUX" LED is on | Auxiliary mode. Please ensure auxiliary cable is connected. |  |
| Pairing with unknown device. Turn off your wanted pairing device. | LED A is still on | / | |
