Connecting to an AV Receiver

While TC417 CAN be used with most AV Receiver, please DO NOT PLUG THE TC417 INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.

Step 1: Connect the TC417 to a power source using the Micro-USB cable we provided, and long-press the power button for about 3 seconds to power it ON.

Step 2: Make sure that the TX/RX switch is at the "TX" position.

The LED indicator should now be flashing GREEN.

Step 3: Pairing your Headphones / Speaker to TC417.

Please refer to THIS ARTICLE for a more detailed step-by-step instruction.

Step 4: Connecting to AV Receiver

There are 2 ways to connect the Oasis plus to your AV Receiver: DIGITAL OPTICAL OUT, or PHONES.

• Option A - DIGITAL OPTICAL
  • Take the Optical Cable that we provided in the box, and plug one end of it into the "Digital Audio Out" or "Optical Out" port on the back of your AV Receiver.
  • 
  • Plug the other end of the cable into the Optical Port labeled "SPDIF IN" on the back of your TC417 transmitter.
  • 
  • Make sure that the SPDIF/AUX Switch on the side has been set to "SPDIF" position.
  • 
• Option B - PHONES (Usually on the front of the AV Receiver)
  • Take the 3.5mm Auxiliary Cable that we provided in the box, and plug one end of it into the PHONES Port on your AV Receiver. You'll need to use a 6.35mm to 3.5mm converter here (needs to be purchased separately.)
  •  
  • Plug the other end of the cable into the AUX Port on the back of your TC417 transmitter.
  • 
  • Make sure that the SPDIF/AUX Switch on the side has been set to "AUX" position.
  • 

For more questions, please send us an email at support@avantree.com, we'll have someone assist you as soon as possible.