Buttons & Indicators
Function |
Operation |
Power On |
First remove the right earbud then left earbud from the charging case. Do not press any buttons; the right earbud will automatically connect to the left earbud and entering pairing mode on its own. OR short press for about 1 second until the LED lights up WHITE about 1 second. |
Power Off |
Put the earbuds back into the charging case and they will power off and begin charging. (preferred method to minimize damage) OR long press for about 5s until the LED lights up RED for about 2 seconds, then turns off. |
Pairing |
Once taken out of the charging case, they will connect with each other automatically and RIGHT earbud will enter pairing mode on its own. The LED on the right earbud will flash WHITE and RED alternately. |
Play / Pause |
Press once on either earbud. |
Volume Up / Down |
Press the on the RIGHT earbud to turn the volume up and the LEFT to turn the volume down. |
Previous / Next Track |
Long press the on the RIGHT earbud to go to the previous track and the LEFT to skip to the next track. |
Answer / End A Call |
Press the once on either earbud. |
Activate Voice Assistant |
Long press the for about 1 second then release on either earbud.
|
Earbuds LED indication:
Status | LED indicator | Image |
Power on |
WHITE for about 1 second |
|
Power off |
Both earbuds show RED until fully charged, then turns off |
|
Ready to pair |
Right earbud alternates between flashing RED & WHITE | |
Connected |
Both earbuds' LEDs are off |
|
Not connected with phone |
Right earbud alternates between flashing RED & WHITE |
|
Earbuds Not connected with each other |
Left earbud rapidly flashes WHITE then slows down to once every 5s | |
Charging |
Both earbuds are solid RED |
|
Fully charged |
Both earbuds' LEDs are OFF |
Charging case LED indication (if using the included cable):
Status | LED indicator | |
Low battery | Left-most LED flashes WHITE | |
Charging | Flashing WHITE according to the battery level of the case | |
Fully charged | All four LEDs are solid WHITE |