SHARP
Step 1: Make sure Avantree transmitter are well connected with your Bluetooth devices such as headphones/speakers.
On Transmitter / Headphone set, on the screen of transmitter, you should see " TX / OPT / FS(LL or other codec) / A" (means they are well connected.)
Step 2: Connect the Avantree transmitter to the TV via the optical cord provided.
Most of Sharp's TV model come with Optical Digital Audio Out port(s) in the back. The optical port is square-shaped with a flap over the port. If you are unable to locate the optical port, you may alternatively use the RED and WHITE RCA ports or the AUX (3.5mm) port to connect the transmitter to the TV.
Step 3: Set TV audio out to Digital Audio Out (so TV will send audio signal to its digital out port)
- Press the [TV icon] button on the supplied TV remote. Press the [ v ] button to select Settings, and then press [OK] button to enter the Settings menu
- Select "Settings" > "Sound"
- Select "Adbance Audio Settings" > "Digital Audio Out"
Step 4: Set TV audio format to PCM (because Bluetooth cannot handle Dolby or DTS)
- Select "PCM"
Step 5: Set HDMI / TV audio in PCM instead of Bitstream or Auto (because Bluetooth cannot handle Dolby or DTS)
Step 6: Finally, you need to turn off the transmitter, wait for 5 sec, and turn it back on AFTER all settings done. (a reset after codec change. No need to do this next time.)
Still doesn't work?
IF you've updated your TV audio settings as above and you've already paired your headphones to the transmitter YET there's still no sound coming out of your headphones, please give Sharp Technical Support a call at:
Tel: 1-888-959-8880
Email Support:https://www.sharptvusa.com/contact/