Alto Clair 2 Overview - Buttons, Indicators & Function Table

Categories

Go to the full support page of the related products: Alto Clair 2

❶Power Switch ❼Boom Mic Port

❷LED Indicator ❽Microphone

❸Volume Wheel ❾AUX Port

❹Previous/Play/Next ❿Charging Pins

❺Charging Port ⓫Charging Indicator

❻Call/Mute Button

Function	Operation
General
Power On	Slide the ❶power switch to the middle revealing the green dot next to "OFF"
Enter Pairing Mode	Slide the ❶power switch to the left toward "PAIR" and hold until the LED flashes BLUE and RED alternately
Power Off	Slide the ❶power switch to the right toward "OFF" revealing the red dot
Voice Prompt On	Hold ❹ & until you hear “Voice Prompt On”
Voice Prompt Off	Hold ❹ & until you hear “Voice Prompt Off”
Call Control
Answer/End a call	Tap the ❻ button once
Reject a call	Hold the ❻ button for 1 second during an incoming call
Activate voice assistant	Tap the ❻ button twice
Toggle mute on microphone (without the boom mic)	During an active call, hold the ❻ button until you hear “Microphone mute on” or “Microphone mute off”
Music Related
Play/Pause music	Tap ❹ once
Volume up	Rotate the ❸volume wheel clockwise
Volume down	Rotate the ❸volume wheel counterclockwise
Previous track	Tap ❹ once
Next track	Tap ❹ once

Status	LED indicator
Pairing Mode	Alternates between flashing RED & BLUE
Reconnecting	Flashing BLUE
Disconnected	Blinks BLUE once every 10 seconds
Microphone Mute ON	Solid WHITE
Connected	Blinks BLUE once every 5 seconds
Low Battery	Blinks RED three times every 10 seconds

Beeping indicator	Headphone Working status
Beep twice every 30 seconds	Out of working range or built in microphone mute on
Short beep once	Answer incoming call
Long beep once	Hang up to end a call
Beep once	Refuse incoming call
Loud beep once	Maximum or minimum volume

Go to full product support page of [Alto Clair 2]

Was this answer helpful?

Views