Part 2. Wireless Headphone and Transmitter Base Are Connected

Note 2.1 The Headphones and the transmitter base in the SET are "Factory Locked." You don't need to manually pair them each time. All you need to do is turn both on and they should automatically connect within 2-5 sec.

Step 1. Power the Headphones ON.

Press & Hold the Power/MFB Button on the Headphone until the Indicator lights up. It should be Flashing BLUE.

Step 2. Power the Transmitter ON.

Flip the Power Switch on the Transmitter to ON and wait for a few seconds. They should automatically connect with each other. Note 2.2 Once connected, the Bluetooth sign next to "1" on the transmitter show SOLID BLUE. The headphone also shows SOLID BLUE and You'll also hear "CONNECTED" through the Headphones.

If this is not the case, please turn both devices off and turn them back on again and wait for 5-10 seconds.

If this does not happen even you tried to turn them both off and on and waited for 5 seconds, you might need manually Re-pair, Connect, and Lock the headphone and transmitter base again. 

You can also connect the 2nd Headphone to transmitter.

The next step is Adjust the TV Audio Settings