How to Factory Reset/Clear Pairing History of Aria 8090T
How to Factory Reset/Clear Pairing History of Aria 8090T
Click on the product name to view this guide & find more help on the full product support page:
Categories
How to Factory Reset/Clear Pairing History of Aria 8090T
Go to the full support page of the related products: Aria 8090T
The Aria 8090T set consists of 2 parts: The DG80 Dongle, and the AS90T Headphones. Each needs to be reset separately.
Step1: Factory reset the DG80:
① Plug in the DG80 USB dongle.
② Place the DG80 into Pairing Mode by pressing and holding the MFB until the Blue LED starts to flash rapidly (BLUE and WHITE for newer models starting from Batch No. 21L1).
③ Once in Pairing Mode, quickly press the MFB twice to reset the DG80. The LED will turn solid Blue for 5 seconds, indicating a successful factory reset, and then it will change to pairing mode's rapidly flashing pattern. For newer models starting from Batch No. 21L1, the LED will turn solid BLUE and WHITE).
Step2: Factory reset the AS90T:
① Turn on the Headphones by sliding the power switch to the middle. You will hear, "Welcome to Avantree," and the LED will flash Blue.
② Press and hold the "+" and "–" buttons simultaneously until the LED turns Pink, indicating a successful factory reset. The headphones will then automatically enter into pairing mode (LED flashes Red & Blue).
To pair, keep both devices close, and once connected, the DG80 LED, and the AS90T headphones LED will remain solid Blue.
Related knowledge:
1.Bluetooth device normally auto-reconnects to its LAST paired / connected device. You might need to make sure the previous used device are Bluetooth-off to avoid interference.
2.It is important to Reset both Bluetooth sender and receiver. In case of cellphone / PC, you can turn off its Bluetooth function and turn it back on.
3.If still not working, you can email us (support@avantree.com) or simply show up online in our twice daily live Zoom Clinic. We will help you to fix it.
