How to Charge
If you can hear the voice prompt say "Low battry" or see the LED blinking RED, you will need to charge your Clipper Pro.
Instructions:
Insert the micro USB (smaller) end into the charging port on the Clipper Pro and the USB end into a power source. You will need to lift a tab to reveal the charging port. You can either use the included charging cord or any USB to micro USB cable to charge.
Indicators:
The LED on the Clipper Pro will light up as SOLID RED when charging and automatically turn off when charging is complete.
Note: You can still use the Clipper Pro while it is charging, but you will have to power it on again because when you plug in the charging cord, it will automatically power off. It takes about 2 hours to fully charge the Clipper Pro.