How to PAIR, CONNECT & LOCK the headphones to my Oasis transmitter in HT5009?
All of the Avantree TV headphones sets, including the HT5009, are "factory locked" before shipping. This means that as soon as they're turned on, they should automatically connect with each other and show Solid Blue on the headphones. There's NO need to pair them each time you want to use them.
If they fail to reconnect, please follow the steps below to RECONNECT and LOCK them again.
Note: Please avoid using the TV as the power source for pairing as Smart TVs may interfere with the pairing process.
1. Get the Oasis Plus transmitter into Pairing Mode.
- Connect the Oasis Plus to a Power Source and turn it on.
- Press & Hold the Bluetooth icon until you see the "TX" LED indicator flashing GREEN & WHITE.
- Starting from Batch Number T23H1, Press & hold the pairing button until you see the "1/2" LED indicator flashing GREEN & WHITE.
2. Get the Headphones into Pairing Mode.
- Make sure the headphones are turned OFF.
- Press & hold the middle button on the headphones until you see their LED indicator flashing RED & BLUE(For Batches before T22B1).
- Slide the power switch to the "pair" position and HOLD it there for 2 seconds until the LED indicator begins flashing RED & BLUE; you will also hear the voice prompt say "Pairing" if you have voice prompts on(Batches T22B1 and after).
If you want to find your product's batch number, here's a guide:
https://avantree.com/product-support/BTHT-5009-BLK#general-where-to-find-lot-number
3. Wait for them to Connect
Wait for the headphones and transmitter to connect. Once connected, you will see "LL" and "A" turn solid white on the transmitter. The headphones will turn solid Blue.
4. Lock them together again
Press & hold the "+" button on Oasis transmitter for about 10 seconds until the "TX" indicator turns GREEN for a couple seconds. Then the transmitter and the headphone are LOCKED together and will always connect to the other once turned on.
Starting from Batch Number T23H1, press & hold the pairing button for the 1st headphones on the transmitter for about 10 seconds until the "1" indicator turns GREEN for a couple of seconds.
Note 1: The headphones cannot be locked under dual-link connection.
Note 2: This function only applies to transmitters from TV Sets.