Optional Patch for Orbit(TC580) - Change the Pairing name of Orbit

Disclaimer: Please contact Avantree Support BEFORE upgrading. Be aware that if you upgrade without prior consultation with Avantree technical support and the product dead due to DFU misoperation, the warranty is not covered.

If you have several Orbits, and want to change the pairing name of them. Please update the firmware of the second /third ones like following

Step 1: Device Firmware Upgrade (DFU) File
Download the DFU file, taking note of where you save it - you'll need it later.

For the second Orbit, pls download this File and use this to update the firmware: Orbit- Rename to Orbit 2

For the third Orbit, pls download this File and use this to update the firmware: Orbit- Rename to Orbit 3

Step 2: Enter Orbit into DFU Mode

After 20L2 batch: (NOTE How to find the batch no.)

Connect the transmitter to a Windows Computer / Mac via the provided gray Type C charging and DATA cable. 

Power on, PRESS & HOLD BOTH “Search” and ”Connect” Buttons for around 7 secs until the LED on the buttom turn solid WHITE,  now transmitter enter DFU mode. 

Before 20L2 batch: 
Connect the transmitter to a Windows Computer / Mac via Type C charging and DATA cable. (NOTE: the cable included in the box is not a DATA cable. If you don't havea spare one, please contact support@avantree.com for a DATA cable to do the firmware update.)

Power on, PRESS & HOLD BOTH “Search” and ”Connect” Buttons for around 7 secs until the LCD screen turn bright with "Aavantree" word for 2 secs and then "Avantree" word disappear and leave the screen blank bright, now transmitter enter DFU mode.

Step 3: Download & Install CSR Bluesuite to Perform DFU

For Windows PC - Please follow the steps in How to Conduct Firmware Update (DFU).

For Mac Computer - Please follow the steps in How to Conduct Firmware Update (DFU).

Please feel free to contact support@avantree.com with any further questions about this product or the above DFU procedure.