How to Use with Mobile Phone / Tablet

Step 1: Entering Pairing Mode on the TWS110 Earbuds.

First remove the right earbud then the left earbud from the charging case, they will turn on automatically.

To prevent connection errors, please do not press any button here.

The voice prompt will say "Power on" and "Pairing" to indicate that the earbuds are in pairing mode.

After removing both earbuds, the LEDs on both will turn white. The two earbuds will automatically pair with each other and the LED on the left earbud will turn off. The LED on the right earbud will alternate between flashing RED & WHITE, indicating that it is in pairing mode. ONLY pair the RIGHT earbud with your device.

Note: If you are turning on the headphones for the first time, the earbuds will automatically go into pairing mode (the LED will flash RED & WHITE).

Step 2: Connecting to Bluetooth on Your Device.

On your device, locate the Bluetooth settings and make sure that Bluetooth is turned on. Find and select “Avantree TWS110” to connect the earbuds.

Once connected, the LED on the headphones will turn off and the headphones will show as connected on your device. The voice prompt will say "Connected" to indicate connection. 

If this is not the first time you are pairing the earbuds with a device, the earbuds will automatically connect to the most recent device upon removal from the charging case. If you would like to connect the earbuds to a different device, first disconnect the earbuds from your original device and the earbuds will go back into pairing mode.