How to add Duet headphones onto Avantree Quartet and Audiplex

Adding onto Avantree Quartet:

Step 1: Turn on the Quartet transmitter, set it to PAIRING MODE manually by pressing and holding the "PAIR" button for 2 seconds until the "Status" LED starts flashing WHITE quickly.

Step 2: Set the headphones into PAIRING MODE (While powered ON , slide the power switch to "PAIR" and hold for 2s, until you see the LED light flashing RED and BLUE quickly).

Step 3: Keep the devices close to each other and wait. Once connected, the “Status” LED on the transmitter will show solid WHITE, and the headphones LED will show solid BLUE.

Adding onto Audiplex

Step 1: Turn on the Audiplex TRANSMITTER and get it into PAIRING MODE

1) Slide the switch "Aux/Opt/Off” to "Opt" or "Aux" to power it on.
2) Press and hold the “Pair” button until the "Audio" indicator start flashing BLUE quickly.

The connected receivers will be disconnected once the transmitter in Pairing mode.

Step 2: Set the headphones into Bluetooth PAIRING MODE (While powered ON , slide the power switch to "PAIR" and hold for 2s , until you see the LED light flashing RED and BLUE quickly).

Step 3: Keep the devices close to each other and wait. Once connected, the “Audio” LED on the transmitter and the headphones LED will show solid BLUE.