HT280 No Green Light on Headphone? Connect Headphone to Transmitter Tower Again

After turning both the headphones AND the transmitter tower on, they should automatically connect with each other; the LED indicator on the headphones (next to the power button) should turn SOLID YELLOW-GREEN.

In case they don't, please follow the steps below to manually reconnect them.

Step 1: Turn both the headphones AND the transmitter tower OFF.

Step 2: Get the headphones into Pairing Mode.

With the headphones turned OFF, press & hold the power button until the LED indicator starts to quickly flash YELLOW-GREEN. This indicates that it's ready to pair.

Step 3: Turn ON the Transmitter Tower.

Flip the power switch on the back of the transmitter tower to ON, and give it a few seconds. Once connected, the LED indicator on the headphones will turn SOLID YELLOW-GREEN. (NOTE:When there is no audio signal transmitted from the tower, the headphone light could be solid red. When ever there is audio signal transmitting from the tower, the headphone light will be turn solid green.)

And now you're good to go! Please email us at support@avantree.com if you have any question!