Connecting to an AV Receiver

While the Audikast Plus CAN be used with most AV Receiver, please DO NOT PLUG THE Audikast Plus INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.

Step 1: Connect the Audikast Plus to a power source using the Micro-USB cable we provided, and flip the power switch to ON.

Step 2: Pairing your Headphones / Speaker to Audikast Plus.

Please refer to THIS ARTICLE for a more detailed step-by-step instruction.

Step 3: Connecting to AV Receiver.

There are 2 ways to connect the Audikast Plus to your AV Receiver: DIGITAL OPTICAL OUT, or PHONES.

• Option A: Digital Optical
  • Take the Optical Cable that we provided in the box, and plug one end of it into the "Digital Audio Out" or "Optical Out" port on the back of your AV Receiver.
  • 
  • Plug the other end of the cable into the Optical Port on the back of your Audikast Plus.
  • 
• Option B - PHONES (Usually on the front of the AV Receiver)
  • Take the 3.5mm Auxiliary Cable that we provided in the box, and plug one end of it into the PHONES Port on your AV Receiver. You'll need to use a 6.35mm to 3.5mm converter here (needs to be purchased separately.)
  •  
  • Plug the other end of the cable into the AUX port on the back of your Audikast Plus.
  • 
    
    

And now you're good to go!

For more questions, please send us an email at support@avantree.com, we'll have someone assist you as soon as possible.