How to Factory Reset SKULLCANDY Headphones

Factory Reset/Clear Pairing History of your SKULLCANDY Headphones

Crusher ANC (EVO)

1. First, remove your headphones from your device’s Bluetooth paired list. Now, press and hold the top and bottom buttons for 2 seconds.

2. You’ll see the LEDs flash purple first, a voice prompt will say “disconnected” and then the headphone will go into pairing mode, the LEDs will flash blue and red and a voice prompt will say “pairing”.

Indy ANC (EVO):

Once both buds have been powered OFF, reset them: Touch and hold each bud for 10 seconds to completely reset them (this will power cycle them on and off again).

Push Ultra: 

1. To ensure ease of re-pairing, please unpair or forget your PUSH™ ULTRA in your paired Bluetooth device list

• Remove the PUSH™ ULTRA from the charging case and Manually Power OFF:
• Touch and hold the Power/MFB button on BOTH buds for 6 seconds
• Once both buds have been powered OFF, reset them: Touch and hold the Power/MFB button on both buds for 10 seconds to completely reset them (this will power cycle them on and off again).

2. Sync the buds together:

• Place the buds back in the case until both LED’s show red, and then pull them back out.
• Both buds will automatically power ON and the LED’s will simultaneously flash BLUE while they sync to each other.
• You will hear a tone to indicate the sync was successful and ONLY the LEFT bud will begin to flash RED/BLUE

Sesh (EVO): 

1. To ensure ease of re-pairing, please unpair or forget your SESH® EVO in your paired Bluetooth device list

2. Remove the SESH® EVO from the charging case and Manually Power OFF:

• Touch and hold BOTH buds for 6 seconds

3. Once both buds have been powered OFF:

• Touch and hold each bud for 10 seconds to completely reset them (this will power cycle them on and off again).

4. Once both buds have gone through the power cycle:

• Place the buds back in the case until both LED’s show red, and then pull them back out.
• Both buds will automatically power ON and the LED’s will simultaneously flash BLUE while they sync to each other.

5. Once the buds have synced together:

• You will hear a tone to indicate the sync was successful and ONLY the LEFT bud will begin to flash RED/BLUE.