Medley 6018 - Power & Charging Related

Charging Dock / Bluetooth Transmitter Base

Note: While charging the headphone on the transmitter base, just need to connect the transmitter base with power source and put the headphone on. No need to switch the base or the headphone to"ON"

• NO built-in battery
• Use provided USB C cable to power up
• Suggested power source specification: 5V/500mA-2A
• Suggested power connection: Wall-plug adapter within this spec range. You can use most of the cellphone wall charger OR the TV USB port. Most people do have spare USB power plug at home so that is not in-box. However, if you do need a power plug for this, we can send you a US / EU / UK type free of charge. Simply drop an email to support@avantree.com.
  
  
  

• Indicators
  
  • Charging headphones- LED on the transmitter dock turns to solid Red 
  • Headphones Fully charged - LED on transmitter dock turns off. 
    
    

• Power On / Off
  • Power On – Switch On
  • Power Off – Switch Off
    
    

Wireless Headphone

• Charging methods
  1. Place on charging base 
  2. Insert provided USB C cable
  
  
• Battery – 300mA build-in rechargeable Lithium polymer battery
• Fully charge time – 2.5H (Using power source larger than or equal to 5V/500mA)
• Used time after fully charged – 20H(60% volume level)
• Indicators
  • Charging - LED on the headphone turns RED while charging with USB cable(No light headphone while charging on transmitter base)
  • Fully charged - LED on headphone turns OFF.
  • Low battery level-LED on the headphone turns RED. Voice prompt "low battery" can be heard once every 5 minutes (Headphones can run about half one hour in low battery level)

• Power On / Off
  • Power On - right side toggle switch to "ON" position
  • Power Off - left side toggle switch to "OFF" position