How to Factory Reset/Clear Pairing History of Oasis Plus

Note: The TX mode and the RX mode each function seperately, so please make sure that you're in the correct mode.

Step 1: Power on the Oasis Plus.

Flip the power switch to either the TX or the RX position, depending on the mode that you'd like to reset.

Step 2: Factory Reset.

Press and hold the "+" and the "-" buttons together for 7 seconds. Please do NOT release the buttons until you hear a “Pairing history cleared” voice prompt - an indication of successful reset. 

Once this is done, the Oasis Plus will re-enter pairing mode, as indicated by the "TX" LED indicator flashing GREEN & WHITE.

Related knowledge:

1.Bluetooth device normally auto-reconnects to its LAST paired / connected device. You might need to make sure the previous used device are Bluetooth-off to avoid interference.

2.It is important to Reset both Bluetooth sender and receiver. In case of cellphone / PC, you can turn off its Bluetooth function and turn it back on.

3.If still not working, you can email us (support@avantree.com). We will help you to fix it.