How to PAIR, CONNECT and LOCK the speaker with the transmitter in Audikast 4860

The speaker and the transmitter in the Audikast 4860 set are "factory locked." This means that they should automatically connect with each other right out of the box (with both devices turned on, of course.)

If they fail to connect, please try to click button on once. If still cannot reconnect, please follow the steps below to RECONNECT and LOCK them again.

1. Get the Avantree Audikast Plus transmitter into Pairing Mode

• Connect Audikast Plus to a power source and turn it on.

• Press & Hold button  until you see the Bluetooth indicator flashing RED & BLUE.
  

2. Get the Speaker into Pairing Mode.

• Turn on the speaker - Clockwise rotate volume control to ON, the LCD screen will light up..

• Press & Hold the Bluetooth button  2 seconds. On the LED screen, it shows “Bluetooth mode，pairing”
  

3.  Wait for them to Connect. Once connected, Bluetooth icon  on the transmitter close   to and LL turn solid BLUE; Speaker LCD screen display “Connected” or “Music Playing”. 

4.  Lock them up again - Press & hold the button on the transmitter for about 10 seconds until the   indicator PINK for a couple seconds. Then the transmitter and the speaker are LOCKED and always link to each other once turned on.