HT4106 - Power & Charging Related

Audikast Transmitter:

Power the transmitter using the USB cable provided. Connect it to a TV USB port (TV must be ON to provide power) or any other 5V/500mA-2A rated USB charger (e.g. your phone charger should work).

TWS106 Earbuds:

If you hear the voice prompt say "Low battery, please charge", you will need to charge your earbuds.

Charging the earbuds in the charging case

Place the right and left earbud in their respective positions in their charging case.

The LED on both earbuds will light up BLUE to indicate that they are charging, then automatically turn off when charging is complete. It takes about an hour to fully charge the earbuds in the case.

Charging the Case

Insert the USB C (smaller) end into the charging port on the back of the case and the USB end into a power source. You can either use the included charging cord or any USB C charging cable to charge.

When plugged in, the LEDs on the front of the case will flash WHITE according to the current battery level.

If the left-most LED flashes WHITE 4 times, it means that the battery level of the case is less than 25% and you will need to charge the case.

When the case is fully charged, all four LEDs will light up WHITE for about 5 minutes then turn off.

The fully charged earbuds can last up to 7 hours, while a fully charged case can charge the earbuds 15-16 times, providing up to an additional 113 hours of play time. While the case is charging, it will also charge the earbuds inside the case.