Connecting to an AV Receiver

While the HT380 CAN be used with most AV Receiver, please DO NOT PLUG THE HT380 INTO ANY OF THE RED / WHITE PORTS ON THE BACK OF A RECEIVER! This may permanently damage the product.

Step 1: Connect the transmitter dock to a power source using the power cable we provided.

The transmitter dock will automatically power on, and the LED indicator labeled "TRANSMIT" on the front of the transmitter dock will start flashing GREEN.

Step 2: Turn on the neck-loop receiver by sliding its power switch to "ON" position.

The LED indicator on the receiver will start flashing GREEN. Give it a few seconds, it'll automatically connect with the transmitter dock. The same LED inidicator will turn SOLID GREEN once they've successfully connected.

Step 3: Connecting to AV Receiver.

There are 2 ways to connect the HT380 to your AV Receiver: DIGITAL OPTICAL OUT, or PHONES.

• Option A: Digital Optical
  • Take the Optical Cable that we provided in the box, and plug one end of it into the "Digital Audio Out" or "Optical Out" port on the back of your AV Receiver.
  • 
  • Plug the other end of the cable into the Optical Port on the back of your transmitter dock.
  • 
• Option B - PHONES (Usually on the front of the AV Receiver)
  • Take the 3.5mm Auxiliary Cable that we provided in the box, and plug one end of it into the PHONES Port on your AV Receiver. You'll need to use a 6.35mm to 3.5mm converter here.
  • 
  • Plug the other end of the cable into the AUX Port on the back of the transmitter dock.
  • 
    
    

And now you're good to go!

For more questions, please send us an email at support@avantree.com, we'll have someone assist you as soon as possible.