Buttons, Indicators & Voice prompt

Categories

Go to the full support page of the related products: TWS106

Basic Controls

Function	Operation
Power On	Remove earbuds from the charging case, they will power on automatically. OR short press for about 2s until the LED lights up BLUE about 1s.
Power Off	Put the earbuds back into the charging case and they will power off and begin charging. (preferred method to minimize damage) OR long press for about 5s until the LED lights up BLUE about 1s, then turns off.
Pairing	Remove earbuds from the case. One earbud will enter PAIRING MODE with the LED flashing BLUE.
Play / Pause	Press once on either earbud.
Volume Up / Down	Double click on the RIGHT earbud to turn the volume up and the LEFT to turn the volume down.
Previous / Next Track	Long press the on the RIGHT earbud for about 2s to skip to the next track and the LEFT to go to the previous track.
Answer / End A Call	Press once on either earbud.
Activate Voice Assistant	Make sure music is not playing, double click on either earbud

LED Indicators

Earbuds LED indication

Status	LED indicator	Voice prompt
Power on	Flash BLUE for about 1s	Power on
Power off	Flash BLUE for about 1s, then turns off	Power off
Ready to pair	One earbud flashes BLUE	Pairing
Connected	Both earbuds' LEDs flash BLUE every 6s	Connected
Not connected with phone	One earbud flashes BLUE, while the other flashes BLUE rapidly	Disconnected
Earbuds Not connected with each other	Both earbuds flash BLUE rapidly	NA
Low battery	NA	Low battery, please charge
Charging	Stay on BLUE	NA
Fully charged	Both earbuds' LEDs are OFF	NA

Charging case LED indication

Status	LED indicator
Low battery	Left-most LED flashes WHITE 4 times
Charging	Flashing WHITE according to the battery level of the case
Fully charged	All four LEDs are solid WHITE for about 5 minutes then turn off

Go to full product support page of [TWS106]

Was this answer helpful?

Views