Part 1. Connect the Bluetooth Headphones/ Speaker to Leaf
NOTE 1.1:
1. It is an audio adapter and recognized as a USB sound card / USB speaker when plugged in. No Bluetooth icon will appear on PC.
2. The pairing / connection via Bluetooth is between Leaf and your headphones / speaker, not the PC.
Step 1: Plug the Leaf in.
To power on the Leaf, plug it into the device you would like to stream audio from. Upon being plugged in, the LED on the Leaf will turn on.
Step 2: Set the Leaf into Pairing Mode.
1st-Time Use: It'll automatically enter pairing mode. The LED indicator will rapidly flash BLUE & WHITE.
Note 1.2: Non-1st Time Use: Long-press the silver MFB on the Leaf until the LED is flashing BLUE & WHITE to set the Leaf into pairing mode.
Step 3: Set your Bluetooth device into Pairing Mode.
Headphone / Speaker 1st-Time Use: The Headphone/Speaker should enter pairing mode automatically when powered on.
Note 1.3: Non-1st-Time Use: Merely powering on WILL NOT get it into pairing mode, you'll need to do so manually. Please either refer to the brand list below or refer to your Headphone/Speaker's user manual. You also can search on Google. E.g. “Bose QC35 Bluetooth Pairing Mode”
Sony, Bose, Jabra, Apple, Beats, Google, Sennheiser, Amazon Echo, JBL, Philips, Panasonic, Audio Technica, Bang Olufsen, Skullcandy, Bowers & Wilkins
Note 1.4: It is important to turn your cellphone, PC or any other previously paired-with devices' Bluetooth function off to avoid interference.
Step 4: Pair your Bluetooth device to the Leaf.
Please keep your Bluetooth device near the Leaf until they have successfully paired with each other. The Leaf's LED will flash either BLUE OR WHITE when connected, depending on which codec it is connected with. Please refer to the LED Indicator FAQ to determine which mode it is in.
If you still can't get Leaf pair with your bluetooth headphones/speakers, please try to Factory reset Leaf and your devices and then pair them again as above.
If you still have problem to pair Leaf with your bluetooth headphones/speaker after all the steps above, please fill the Troubleshooting Verification Form- Can Not Pair for us to identify the issue faster and solve the problem as soon as we can.