How to Use in FM Mode

You can use this radio speaker in different modes including FM, Bluetooth, AUX and SD card modes, here are some main guides that might be helpful:

1. Find a channel, there are two options to do this:
1) For the first time of use, it will start to auto search FM channels once powered on, you can use these two buttons   to go to the channels you like;
2) Use the number pads on the top, e.g. for FM102.5: Press the buttons 1 - 0 - 2 - • - 5  to go into this channel directly.

2. Save and play your favorite channels:
After going into one of the channels you like, press and hold any number on the top for 2 seconds until you see "Channel Saved" on the screen, then that channel is saved to your list.

After all the channels you like are saved to your list, you can play any saved channel by short pressing the corresponding number that you saved the channel to. For example, if you saved channel 102.5 to number "2", just short press number "2" on the top to go into channel 102.5 from other channels.

3. Delete a channel:
While playing the channel that you want to delete, short press "MENU" button, and select "Delete" to delete this channel.

4. Other functions you can use under button "MENU":
1) Short press button "MENU", you can get the following:
a. Sound mode: You have mode options of "Natural / Rock / Pop / Classic / Jazz / Soft" to choose from.
b. Auto-search: To auto search FM channels.
c. Delete: To delete this channel.
d. Detele all: To delete all channels.
2) Long press button "MENU", you can get the following:
a. Backlight: You can choose a backlight time here, you have choices of 1 second / 10 seconds / 30 seconds / 1 min / 2 min / 5 min / 10 min.
b. Contrast: You can set the light contrast of the screen here.
c. Voice Settings: To choose to turn on or off the voice prompt.
d. Factory Reset: To factory reset the radio here.
e. Firmware Ver.: To check the firmware version of this radio.