Connecting to a Mac Computer

Having a device plugged into the 3.5mm jack of the Clipper Pro will not affect its pairing, so feel free to either plug a device in at any time. 

Step 1: Entering Pairing Mode on the Clipper Pro.

Make sure that the Clipper Pro is off. From there, hold the power button for about 5 seconds until the LED indicator alternates between flashing RED & BLUE and the voice prompt says "Pairing" (if you have a device plugged into the Clipper Pro).

Note: If you are turning on the Clipper Pro for the first time, it will automatically go into pairing mode (the LED will flash RED & BLUE).

Step 2: Enable Bluetooth on your Mac.

Find the Bluetooth icon (usually located in the upper right corner of your screen). Turn Bluetooth on.

Step 3: Go to Bluetooth Preferences.

Click on "Open Bluetooth Preferences" in the drop down menu.

Step 4: Connect the Clipper Pro to your Mac.

Locate "Avantree Clipper Pro" in the list and click on the "Pair" button.

Once they are paired, you will see "Avantree Clipper Pro" under Devices when you click on the Bluetooth icon. The LED on the Clipper Pro will blink BLUE once every 5 seconds to indicate connection. If you have a device plugged into the Clipper Pro, you will also hear the voice prompt say "Connected".