3-Receiver-1-Transmitter 2.4G Wireless Dongles Set. Connect Multiple headphones or Speakers to One audio source. Independent Volume Control, No audio lag

Free Shipping and Returns

Subtotal: $149.99

• Technology: 2.4GHz
• Frequency response: 20Hz - 20kHz
• Audio bitrate/sampling rate: 16bit/48khz
• Latency: 30ms
• Music play time: 4hrs for TX, 7hrs for RX
• Charging time: 1.5hrs
• Battery: 450mAH lithium battery
• Operating range: Up to 100ft / 30m

• Transmitter X 1
• Receiver X 3
• USB A to Type C Charging Cable X 1 (1.5M/5FT)
• 3 in 1 USB A to Type C Charging Cable X 1 (60CM/2FT)
• Optical Audio Cable X 1 (1.5M/5FT)
• AUX 3.5mm Audio Cable X 1 (1.5M/5FT)
• AUX 3.5mm to RCA Audio Cable X 1 (35CM/1FT)
• AUX 3.5mm audio cable for receivers X 3 (60CM/2FT)
• Attachment Clip X 3

Step by Step Setup Video




Individual Volume Stable Connection Light & Durable

Individual Volume

Each Audiplex receiver is able to adjust the connected headphone/speaker’s volume independently.

Stable Connection

2.4Ghz technology provides reliable connection at a range of up to 100ft / 30m with no audio delay.

Light & Durable

A small and compact design built with sturdy materials allows the Audiplex to be used versatilely.

Conference Meetings Theater Performances Community Gatherings Outdoor Movies

For Conference Meetings

For Theater Performances

For Community Gatherings

For Outdoor Movies

Easy Setup


Connect your Audiplex transmitter to the audio source via either the OPT or AUX 3.5mm cable.


Make sure the transmitter’s audio setting matches the connectivity form (i.e. “OPT” for optical connections, “AUX” for AUX 3.5mm connections).


Plug your listening devices into the receivers via 3.5mm AUX cables.


Power on the receivers and they will automatically connect to the transmitter.

Add More Receivers


Press & hold the PAIR button on the transmitter to place it into the pairing mode. The LED indicator will flash blue rapidly.


Press & hold the PAIR button on the add-on receiver(s) to place them into pairing mode. The LED indicators will flash blue rapidly.


Hold the receiver and transmitter close together. On successful connection, the LED indicators on both should turn solid blue.


Repeat the last 3 steps and add up to 100 receivers to one transmitter.