Wireless Audio Receiver for Audiplex
2.4G Wireless Receiver for Avantree Audio System (Audiplex/Quartet/Duet)
- Specifications
Details -
• Technology: 2.4GHz
• Frequency Response: 20Hz - 20kHz
• Latency: 30ms
• Music Play Time: 7hrs
• Charging Time: 1.5hrs
• Battery: 450mAH lithium battery
• Operating Range: Up to 100ft / 30m - What's in the box • Receiver X 1
• USB A to C Charging Cable X 1(60CM/2FT) - Additional Info.
Products Bar Code - 6945624903761
Top Questions
- Part 1: Connecting the Audiplex 2403s Transmitter to your Audio Source
Prepare the Transmitter and connect it with your Audio source
Option 1: Digital / Optical output - plug optical cable to Transmitter Port ③ and your audio source. Switch Transmitter ON to “Opt” side.
Option 2: Headphone jack output - Plug Aux 3.5mm cable to Transmitter Port ④ and your audio source. Switch Transmitter ON to “Aux” side.
Option 3: RCA audio output - connect Aux 3.5mm cable & RCA cable . Then plug 3.5mm cable into Transmitter Port ④ and plug RCA cable into your audio source. Switch Transmitter ON to “Aux” side.
Note Valid RCA port must labeled "Audio OUT"
Was this article helpfulStill need help? Please email us at support@avantree.com
Back to Top - How to Connect New Receiver (RX) to the Transmitter of Audiplex 2403s
You can connect more receivers with the Audiplex 2403s transmitter
Step 1 - Turn on the TRANSMITTER and get it into PAIRING MODE
1) Slide the switch "Aux/Opt/Off” to "Opt" or "Aux" to power it on.
2) Press and hold the “Pair” button until the "Audio" indicator start flashing BLUE quickly.
The connected receivers will be disconnected once the transmitter in Pairing mode.
Step 2 - Turn on the new RECEIVER and get it into PAIRING MODE
1) Slide the switch "Aux/Opt/Off” to "Opt" or "Aux" to power it on.
2) Press and hold the “Pair” button until the "Audio" indicator start flashing BLUE quickly.
Keep them within distance and wait for 1-3 seconds, once connected, the indicator on BOTH devices turn SOLID BLUE.
Repeat above instructions to connect more receivers to the transmitter.Note: For batch numbers T22D1 and after, the receiver no longer has the optical input. Where to find the batch number.
Was this article helpfulStill need help? Please email us at support@avantree.com
Back to Top