How to Connect your Audio Technica Headphones and/or Speakers to TV Wirelessly through Bluetooth?

 

Want to connect your AUDIO TECHNICA Bluetooth Wireless Headphones/Speakers to your TV and listen to TV through them? 

No problem! There are TWO ways to do it.

 

If your TV has built-in Bluetooth capability

(please check your TV's user manual), here's what you do:

1. Get your Audio Technica Headphone into pairing mode (Please scroll to the bottom of the page or see your Audio Technica user manual.)

2. Go into your TV's Bluetooth menu, search & select your Audio Technica Headphone to connect.

3. You may adjust volume via your TV's remote control.

 

If your TV does NOT have built-in Bluetooth

Or if you'd like to connect MORE THAN ONE PAIR of headphones to your TV simultaneously, you'll have to connect using a Bluetooth Audio Adapter, somthing like these:

 

Avantree Oasis Plus (Learn More)

 

Avantree Orbit (Learn More)

With these, you'll be able to:

- Get extended Bluetooth Range.

- Connect up to TWO PAIRS of headphones to your TV (adapter) simultaneously.

- In the case of Oasis Plus and Orbit, it can be used simultaneously with a SoundBar/Stereo Receiver (AVR) while sharing ONE Digital Optical Port (See THIS ARTICLE for more details regarding this function.)

Here are the Instructions of Connecting using an Adapter:

1. Connect your Bluetooth adapter to Power.

2. Connect the Bluetooth adapter to TV. Our adapters support Digital Optical (aka TOSLINK or SPDIF,) 3.5mm Auxiliary (aka Headphones Jack,) and RCA (Red/White) Audio Output Ports. Please see your adapter's user manual for more details.

3. Get your Audio Technica Headphones into pairing mode (Please scroll to the bottom of the page or see your Audio Technica user manual.)

4. Get your Bluetooth adapter into Bluetooth Pairing mode as well. Please see your user manual if you're not sure how.

5. Keep your Audio Technica Headphone close to the adapter until they connect.

6. Once connected, if you're using Digital Optical connection, please go to your TV settings menu and change your Digital Audio Format to PCM.

7. And you'd be good to go

 

Below is a list of how to get Audio Technica's most popular headphones into Bluetooth Pairing Mode, just for your convenience.

ATH-M50xBT: With the headphone turned ON, Press & hold the "+" and the "-" simultaneously for 8 seconds until you see the indicator on the Headphone start rapidly flashing WHITE.

ATH-ANC900BT: With the headphone turned ON, Press & hold the TOP and MIDDLE parts of the Touch Panel simultaneously for 10 seconds until you see the indicator on the Headphone start rapidly flashing WHITE.

ATH-ANC300TW: Place the headphones into the charging case (with battery level remaining for the case) and press and hold (about 6 seconds) the multifunction button on the R (right) side. The indicator lamps on both the L (left) and R (right) light in RED. After lighting in RED, the product will switch to the “searching for devices” state and you will be able to pair with your desired Bluetooth device.

ATH-CKS5TW:  Place the headphones into the charging case (with battery level remaining for the case) and press and hold (about 6 seconds) the multifunction button on the R (right) side. The indicator lamp lights in RED. After lighting in RED, the product will switch to the “searching for devices” state and you will be able to pair with your desired Bluetooth device.

Please contact us at support@avantree.com if you have any question.

You might be interested in:

 

Avantree TWS116 Wireless earbuds for tv 

Avantree TWS106 Wireless sports earbuds