Voyager Setup Guide

TASKChoose the mode that matches your listening device.

✓DONEYou have selected the setup path for your listening device.

IF NOTUse Bluetooth for standard headphones or earbuds. Choose Auracast only when the receiver supports Auracast / LE Audio.

TASKConnect one classic Bluetooth headphone to Voyager.

1. Prepare the headphones

   Turn off Bluetooth on nearby phones and computers. Put the headphones in pairing mode—not only powered on.

   Headphone pairing helpChoose brand

   AirPods / AirPods Pro

   Check the back of your case.

   There is a button

   AirPods 1–3 / AirPods Pro 1–2

   1. Open the case with your AirPods inside.
   2. Hold the button on the back for about 5 seconds.

   

   Ready when: the case light flashes white.

   There is no button

   AirPods 4 or 5 / AirPods Pro 3

   1. Open the case with your AirPods inside.
   2. Double-tap the front of the case.

   

   Ready when: the case light flashes white.

   AirPods Max

   Press and hold the noise control button for about 5 seconds.

   Ready when: the status light flashes white.

   Bose

   1. Turn on the headphones or open the earbud case.
   2. Hold the Bluetooth or power button until the light flashes blue or you hear “Ready to connect.”

   Ready when: the light flashes blue or the voice prompt confirms pairing.

   Beats

   1. Turn on the headphones.
   2. Hold the system or power button until the indicator flashes.

   Ready when: the indicator flashes for pairing.

   Sony

   1. With the headphones off, hold the power button for about 5 seconds.
   2. For Sony earbuds, use the case or touch-sensor pairing command for your exact model.

   Ready when: the light flashes blue or you hear “Bluetooth pairing.”

   Samsung Galaxy Buds

   1. Place both earbuds in the case, close it for 5–6 seconds, then open it.
   2. If pairing does not start, wear both earbuds and touch both touchpads until you hear the pairing sound.

   Ready when: the earbuds announce pairing or show their pairing pattern.

   JBL

   1. Hold the Bluetooth or power button until the indicator flashes rapidly.
   2. If JBL reconnects to a phone, turn that phone Bluetooth off and try again.

   Ready when: the indicator flashes rapidly.

   Other headphones

   1. Hold the power, Bluetooth, or main button until the light flashes rapidly.
   2. Check the headphone manual for the exact command if the light does not change.

   Ready when: the headphones show their documented pairing pattern.

2. Start Voyager search

   Slide Voyager to ON / Bluetooth. Wait for Searching on the screen. If it is not searching, hold the middle button for 2 seconds.

   Watch: turn on Voyager and start Bluetooth search.

3. Select the headphone

   Use + or − to highlight the headphone name, then press the middle button once.

   Watch: select the headphone name and connect.

Continue to Connect Audio →

✓DONEVoyager shows and the correct headphone name.

IF NOTOpen “Headphones do not appear” in Quick Help below.

TASKStart Voyager’s Auracast broadcast and join it from the receiver.

1. Select Auracast mode

   Slide the switch to the Auracast position. Wait for Broadcasting on the screen.

   Watch: start Voyager’s Auracast broadcast.

2. Choose the broadcast type

   Double-press the middle button to switch between Standard and Hearing aids. Choose the mode that matches the receiver.

3. Join from the receiver

   Open the receiver’s Auracast controls, choose Find and Join Broadcast, then select Voyager.

Continue to Connect Audio →

✓DONEThe receiver joins Voyager and Voyager shows Broadcasting.

IF NOTOpen “Cannot join the Auracast broadcast” in Quick Help below.

TASKConnect Voyager to the audio source and confirm sound.

1. Insert the audio plug

   Insert Voyager fully into the source headphone or audio-out jack. Use the dual-prong adapter only with a two-pin airplane socket.

2. Start playback

   Play audio from the source. At home, use an analog 3.5 mm output.

3. Adjust volume safely

   Raise volume at the source first, then Voyager, then the headphones. Start low.

✓DONEThe listening device plays clear source audio.

IF NOTOpen “No sound after connecting” in Quick Help below.