Headphones for HT280

Top Questions

• How to Add Two or More Headphones onto HT280

   

  You CAN add a 2nd pair of headphones to HT280 and share the audio with a partner, BUT you can ONLY do so with one from another HT280 set; the other headphones will NOT work. You can repeat this procedure and connect with up to 100 HT280 headphones.
  
  

  Step 1: Turn OFF or UNPLUG the 2nd HT280 Set.
  
  

  Step 2: Turn the 1st HT280 Set ON (both the headphones AND the transmitter tower.)

  

  
  
  

  Step 3: Turn OFF the 1st HT280 Set (both the headphones AND the transmitter tower.)

  Yes, we know this is quite annoying, but please bear with us for a little longer.
  
  

  Step 4: Get the headphones from the 2nd HT280 set into PAIRING MODE.

  Press & Hold the Power button on the headphones for 5 seconds until you see the YELLOW-GREEN LED indicator flashing. (Starting from Batch T23F1, the LED indicator will flash RED & GREEN)

  Note: The HT280 set has been upgraded from T23F1(WSHT-280-BLK-RX single headphones upgraded from T23J1). The new version is incompatible with the batch before T23F1.

  
  
  

  Step 5 (Optional): If you'd like to Connect more Headphones onto HT280...

  Please repeat Step 4 on all the HT280 headphones you'd like to add.
  
  

  Step 6: Get the transmitter from the 1st HT280 set into PAIRING MODE.

  Turn the transmitter tower from the 1st HT280 set ON (ONLY the transmitter. Keep the headphones OFF.) It will enter pairing mode and the POWER indicator on transmitter will start flashing BLUE rapidly. (Starting from batch T23F1, the TRANSMIT LED indicator on the transmitter will flash GREEN rapidly)
  
  

  Step 7: Give them a few seconds to connect.

  Once connected, the RED LED indicator on headset will turn YELLOW-GREEN.

  

  And voila! You now have two or more headphones connected to the 1st transmitter.
  
  

  If you're still having trouble with this, please contact us at support@avantree.com.

   

  Was this article helpful

  1 0 890 Views Copy URL

  Still need help? Please email us at support@avantree.com

  Back to Top
• HT280 No Green Light on Headphone? Connect Headphone to Transmitter Tower Again

  After turning both the headphones AND the transmitter tower on, they should automatically connect with each other; the LED indicator on the headphones (next to the power button) should turn SOLID YELLOW-GREEN.

  In case they don't, please follow the steps below to manually reconnect them.

  
  Step 1: Turn both the headphones AND the transmitter tower OFF.

  
  Step 2: Get the headphones into Pairing Mode.

  With the headphones turned OFF, press & hold the power button until the LED indicator starts to quickly flash YELLOW-GREEN. This indicates that it's ready to pair.

  

  
  Step 3: Turn ON the Transmitter Tower.

  Flip the power switch on the back of the transmitter tower to ON, and give it a few seconds. Once connected, the LED indicator on the headphones will turn SOLID YELLOW-GREEN. (NOTE:When there is no audio signal transmitted from the tower, the headphone light could be solid red. When ever there is audio signal transmitting from the tower, the headphone light will be turn solid green.)

  

  

  
  And now you're good to go! Please email us at support@avantree.com if you have any question!

  Was this article helpful

  9 10 1149 Views Copy URL

  Still need help? Please email us at support@avantree.com

  Back to Top