Wireless TV Set with Two Headphones, Low Latency, Voice Clear
/
$219.99
FREE shipping and returns
SHIPPING
We have warehouses located in the US, EU, Canada, and Australia; orders placed in other regions will be delivered via international shipping.
Purchases from Avantree.com gets 2-year warranty
WATCH IN PEACE - The Duet comes with 2 pairs of wireless headphones that are pre-paired with the transmitter / charging base. Listen alone or with a partner at your own desired volumes.
INDEPENDENT VOLUME CONTROL - Both headphones have significantly higher max volume levels than competitors’, and each pair of headphones comes with built-in, independent volume controls, so you can adjust your own volume without affecting the other’s.
PASS-THROUGH SUPPORT - The Duet’s pass-through capabilities allow you to listen through both an external speaker and the Duet headphones simultaneously.
CLEAR VOICE MODE - By lowering background noise and boosting voices, the Duet’s clear voice mode allows you to hear on-screen conversations and dialogue more easily.
EXTENDED PLAYTIME - Each pair of headphones can last up to 20 hours on a single charge, and the included transmitter doubles as a hassle-free charging dock that’ll fully charge your headphones within 1.5 hours.
SCALABLE TO 100 - Thanks to the Duet's 2.4Ghz technology, the transmitter can pair with up to 100 headphones with no lip-sync delay and no problems. Please note that this only works with compatible headphones, such as the Avantree Duet-Extra, Quartet-Extra and Audiplex- Extra.
Headphone x 2
Transmitter with charging dock x 1
Power cable x 1 (1.5M/5FT)
Back up charging cable for headphone X 1 (0.5M/2FT)
Optical audio cable x 1 (1.5M/5FT)
3.5mm audio cable x 1 (1.5M/5FT)
3.5mm to RCA audio cable x 1 (35CM/1FT)
The Avantree Duet is a Two-Headphone-One-Transmitter 2.4Ghz wireless TV set for watching TV with a partner. Enjoy perfectly in-sync visual and audio while your family enjoys the TV with you through the external TV speakers. Easy charging with the transmitter charging dock 2-in-1. Features “Clear Dialogue Mode”, perfect hard of hearing users.
Completely Hassle-Free
Enjoy TV in quietness, with a partner - The Duet set comes with two pairs of wireless headphones, each already factory pre-connected to the transmitter base, so there’s no need for you to go through the complex & painful manual pairing process. Simply connect the transmitter base to TV, power everything on, they’ll connect with each other automatically and you’ll be good to go!
Works WITH your Sound Bar & AVR
The “Bypass” or “Pass-through” feature of Avantree Duet Wireless Headphones for TV allows the two headphones + transmitter set to work TOGETHER with your existing soundbar or stereo AV receiver AT THE SAME TIME. This is perfect for group settings – The headphone user will be able to listen to the TV at his/her own volume while the others can hear directly through the sound bar & speaker system.
At your Own Volume
Both wireless TV headphones in the Duet TV set are engineered with significantly higher volume level compared to its competitors, making them perfect for users who are hearing impaired. If it’s too loud for you, each headphone can adjust its own volume level independently without affecting the other unit(s) connected.
Easy Charging
When the battery is low, the transmitter base doubles as a charging dock; simply place the headphones onto the charging dock, they’ll start charging and be ready again within 1.5 hours.
Hear the Conversations
Having trouble hearing and understanding the movie/TV dialogues? That won’t be an issue when you have the Duet Wireless Headphones for TV. Activate the “Clear Dialogue Mode” with the click of a button, the dialogue audio will be digitally enhanced, and you’ll finally be able to hear the conversations properly.
If you contact us via email, please try to provide the following images for quick diagnosis:
1. Photo of the transmitter box and headphone, both turned on with their LED lights (Solid Blue?)
2. Photo of TV Audio output ports & TV HDMI ports
3. Photo of TV Screen with Sound Settings page - with Digital Optical Out selected (if you use optical cable)
4. Photo of TV Screen with HDMI in & Out Audio Format both set to PCM
5. If you also have AV Receiver and Soundbar connected, please draw a simple diagram how you connect them and the audio signal flow. (Note: The following diagram is just for your reference, you can draw it by hand.)
If you’re using the Duet-RX wireless headphones as an additional headphone for the Duet, Here’s how to add them to the Duet.
Note: You can repeat this procedure and connect with up to 100 headphones.
Step 1: Get the Duet Transmitter into pairing mode.
Turn on Duet Transmitter. Set it into PAIRING MODE manually by sliding and holding the Power Switch to "PAIR" for 2 seconds until the LED starts flashing Blue and Red quickly, then release the switch back to "ON".
Step 2: Get the Headphones into Pairing Mode.
Turn on the headphones. Slide and hold the power Switch to "pair" until the LED indicator starts flashing Blue and Red, then release the switch back to "ON".
Step 3: Give them a few seconds to connect.
Once connected, the LED indicator on headset and transmitter will turn solid Blue.
Hearing audio through the TV speaker AND the headphones at the same time
If you'd like to get sound on both your TV speakers AND headphones at the same time, it DEPENDS on whether the TV is able to support getting sound out to two sources simultaneously. It is NOT related to the transmitter. The transmitter receieves the sound from your TV's output and streams it over to your Bluetooth headphones or speakers.
However, if you connect the transmitter to your TV via OPTICAL port and you can see the following options under the SOUND OUTPUT settings on your TV...
You can actually get sound simultaneously! Follow these steps:
Go to SOUND OUTPUT and change this to OPTICAL / EXTERNAL SPEAKER
Once there's sound going out into the headphones, go back to SOUND OUTPUT and change this back to TV SPEAKER
If your TV doesn't support simultaneous output to both the TV speakers and headphones, here are some alternative methods you can consider:
For Audio Transmitter Users:
Solution 1: Connect the Transmitter to a TV box / AV Receiver instead
If you have a TV box (DirecTV, Xfinity, Bluray Player, etc.), you should be able to find audio output ports on the back of them. Try to connect the Avantree transmitter directly here instead of the TV. This method essentially allows you to "go around" the TV's built-in speakers.
Con: will not work on streaming apps if you have a Smart TV or streaming device
For all users:
Solution 2: For users with TV Sondbar / AV Receiver
2.1 Use Transmitters with Passthrough Function
If you have a Soundbar or Stereo Receiver, check your transmitter to see if it supports passthrough. If not, you can return your current product and consider purchasing one of these: Orbit, Oasis Plus, Opera, Medley 6018, HT5009, HT5006, Duet, or Quartet.
Our industry leading "Passthrough" function allows you to put the transmitter/base between a TV and an external speaker and have audio come out from both devices AT THE SAME TIME.
2.2 Use Audio splitter/extractor
For AUX Output - Use an audio splitter (e.g. Avantree TR302) to share the TV's audio between an EXTERNAL SPEAKER and the Transmitter. The splitter in this example is a 3.5mm audio splitter
For Optical AUDIO OUT - Use an optical splitter (e.g. J-Tech splitter) to share the TV's audio between an EXTERNAL SPEAKER and the Transmitter. The splitter in this example is an optical audio splitter.
For HDMI ARC OUT - Use an HDMI Audio Extractor (e.g. HAX05) to share the TV's audio between an EXTERNAL SPEAKER and the Transmitter. The splitter in this example is an ARC supported HDMI audio extractor.