Boombyte

Top Questions

• Navigating the Menu/System Setting

  To access the settings page of the device, long press the "Setting Gear/OK" button.

  The settings menu includes options such as Backlight, Shutdown timer, Contrast, Voice Settings, Factory Reset, and Firmware Ver., Return.

  The Backlight options include 0sec, 10sec, 30sec, 1min, 2min, 5min, 10min, with the default setting being two minutes.

  The Shutdown timer options include 0sec, 10min, 20min, 30min, 45min, 60min, 90min, with the default setting being turned off.

  The Contrast options range from 1-20, with the default brightness being 10.

  The Voice Settings feature can be turned on or off by accessing the settings page and selecting the option. The default voice prompt is set to off.

  There is a Factory Reset option available on the settings menu.

  To check the Firmware version, select the Firmware Ver. Return option on the settings menu.

  Note: EQ only available in Bluetooth mode. To access the EQ settings, please short-press the "System Gear/OK" button while in Bluetooth mode. You will then see the Equalizer option appear, and pressing the same button again will show you six different EQ modes to choose from: Natural(default), Rock, Pop, Classic, Jazz, and Soft.

  Was this article helpful

  0 0 179 Views Copy URL

  Still need help? Please email us at support@avantree.com

  Back to Top
• How to Use in FM Mode

  1. Turn on the Boombyte by rotating the volume control clockwise to "ON"; the LCD screen will light up.

  If it's your first time using it, wait for auto-scanning to complete, or press and hold the FM button to start auto-scanning for channels.

  2. To select channels, use the "<SEEK / SEEK>" buttons to scroll, or enter the channel frequency number using the number pad, i.e., for FM102.5, press "1-0-2-5."

  The Boombyte will scan up / down for the next clear channel if you press and hold the <SEEK / SEEK> button.

  3. To save channels for quick access, turn on your favorite local FM channel and hold the number pad until the screen shows "Channel Saved.". You can save up to nine channels.

  4. Click the corresponding number pad button once to play saved channels

  Was this article helpful

  0 0 170 Views Copy URL

  Still need help? Please email us at support@avantree.com

  Back to Top
• How to Use in Bluetooth Mode
  1. Pair and connect- Turn on the Boombyte, then press the MODE button once to enter Bluetooth speaker mode. Activate Bluetooth on your device and search for "Avantree Boombyte" to pair and connect.
  2. To reconnect- Each time you turn on the speaker and enter Bluetooth mode, it should automatically reconnect to the last connected device. If it doesn't, select "Avantree Boombyte" on your device to establish the connection.

  Note: EQ only available in Bluetooth mode. To access the EQ settings, please short press the "System Gear/OK" button while in Bluetooth mode. You will then see the Equalizer option appear, and pressing the same button again will show you six different EQ modes to choose from: Natural(default), Rock, Pop, Classic, Jazz, and Soft.

  Was this article helpful

  0 0 125 Views Copy URL

  Still need help? Please email us at support@avantree.com

  Back to Top
• How to Save and Play a Channel On Avantree Boombtye?

  To save your favorite channels on the Boombyte radio and easily access them in the future, follow these steps:

  Step 1: Find your favorite channels using one of these two options:

  1. For the first use, the radio will automatically search for FM channels when powered on. Use the "<SEEK / SEEK>" buttons to go to the channels you like. If you want to auto-search for FM channels again, press and hold the FM button.
  2. Alternatively, use the number pad on the top of the radio to enter the frequency of your preferred channel, for example, for FM102.5, press the buttons 1-0-2-5.

  Step 2: Save your preferred channels to your list.

  After you tune to your preferred channel, press and hold any number (except 0) on the top of the radio for 2 seconds until "Channel Saved" appears on the screen. This saves the channel to your list.

  Note: Press and hold the “0” button to lock/unlock the buttons.

  Step 3: Access your saved channels by pressing the corresponding number on the top of the radio.

  For instance, if you saved channel 102.5 to number "2," press number "2" on the top to tune to channel 102.5 from other channels.

  Note: While you can assign a channel to any number, we recommend to follow a specific order that you can easily remember.

  Was this article helpful

  0 0 139 Views Copy URL

  Still need help? Please email us at support@avantree.com

  Back to Top
• What is the Playback Order of SD Card Songs?

  The Soundbyte/Boombyte offers 4 different play modes for the SD card： 
  
  1. Repeat All – It plays all tunes in each and every folder on the SD card, starting with the earliest uploaded folders/tunes first. At the end it'll repeat.
  2. Repeat Folder – It plays tunes in one specific folder only, starting with the earliest uploaded tunes first. When it reaches the end of the folder, it'll repeat.
  3. Repeat One – It plays the same tune on repeat.
  4. Random Mode – It randomly plays your tunes from all folders. 
  
  If you have some tunes you particularly like, we recommend using Repeat Folder mode - put all of the songs you want to repeat in one folder and use this mode.

  When you stop playback, the Soundbyte/Boombyte will remember the mode and the track and will resume where you left off the next time you press play.

  Was this article helpful

  0 0 1084 Views Copy URL

  Still need help? Please email us at support@avantree.com

  Back to Top