SPEDIZIONE
2-5 giorni lavorativi. Resi gratuiti entro 60 giorni con etichetta prepagata su richiesta.
Aura Loop | Auracast TV Earbuds & Transmitter Set
Auracast TV Earbuds with Clear Dialogue & Easy Charging Dock
- $129.99
- Prezzo unitario
- per
Aura Loop: Earbuds + Charging Base & Transmitter
Aura Loop: Earbuds + Charging Base & Transmitter
Aura Loop Dual: Dual Earbuds + Charging Base & Transmitter
-
Future-Ready Auracast TV Audio System
A next-generation TV listening system powered by Auracast. Broadcasts TV audio for shared listening with compatible earbuds and Auracast-enabled hearing aids. (Supports Auracast devices only – not for regular Bluetooth headphones or speakers.) -
TV Compatibility & Soundbar Note
Designed to work with your TV using the included transmitter via Optical, AUX, or RCA connections (please check your TV has one of these outputs before purchase). This system does not support audio passthrough to a TV soundbar. -
Dual Link with TV & Phone via Transmitter
When used with the transmitter, the earbuds can stay connected to your TV while remaining linked to your phone, allowing seamless switching between TV audio and incoming calls or alerts. -
Clear Dialogue with 3 EQ Modes
Choose from three EQ modes, including Voice Clear, to enhance speech and improve dialogue clarity. Sound experience may vary depending on ear fit, EQ selection, and TV audio output settings. -
Easy Dock Charging
Drop the earbuds into the charging dock after watching TV — no cables required. Designed for simple, everyday charging and easy use for seniors.
• Earbuds
• Transmitter
• Charging Dock
• Type C Power Cable for Transmitter (5ft / 1.5m)
• Type C Charging Cable for Earbuds (1.6ft / 0.5m)
• Optical Audio Cable (5ft / 1.5m)
• AUX 3.5mm Audio Cable (5ft / 1.5m)
• USB Wall Adapter
• Extra Black Earbuds Tips (S, L)
In Stock—Estimated delivery
3–7 business days
$129.99
Comparison Table
Model
- Audio Performance
- Auracast Support
- Add More Earbuds
- Bluetooth Version
- Dual Link with TV & Phone
- Playtime
-
- Enhanced clarity & ultra-low delay (next-gen codec)
- ✓
- ✓ – Unlimited
- v5.4
- ✓
- Up to 24 hrs
-
- Balanced sound & low delay
- –
- ✓ – 2
- v5.3
- –
- Up to 20 hrs
-
- Low-latency TV audio
- –
- ✕
- v5.0
- –
- Up to 20 hrs
-
- Low-latency TV audio
- –
- ✕
- v5.3
- –
- Up to 10 hrs
Specifications
🎧 Transmitter & Earbuds Set
| Operating Range | Up to 100ft / 30m |
| Audio Latency | 50-60ms |
| Utilized Audio Codecs | LC3 |
| Max Connected Receivers | 100 |
🛰 Transmitter
| Bluetooth Version | v5.4 |
| Supported Audio Codecs | LC3 |
| Supported Bluetooth Profiles | AURACAST - LC3 |
| Digital Input | Optical supports PCM audio streams, 44.1kHz–96kHz, 16bit–24bit |
| Analog Input | 3.5mm jack, input voltage range 0.15–1.0Vpk |
| Input Voltage / Current | DC 5V / 500mA |
| Power Supply | 5V / 20mA–500mA rated USB charger or TV USB port |
| Power Port | Type C |
| Product Size | 73mm × 66mm × 17mm |
| Product Weight | 38g |
💡 Earbuds
| Bluetooth Version | v5.4 |
| Supported Audio Codecs | LC3, aptX Adaptive, aptX HD, aptX, SBC |
| Supported Bluetooth Profiles | HFP v1.8, AVRCP v1.6.2, A2DP v1.4 |
| Drivers | 10mm |
| Impedance | 32Ω |
| Frequency Response | 20Hz – 20kHz |
| Sound Pressure Level (SPL) | 110dB (1kHz / 1V) |
| Signal-to-Noise Ratio | L:112dB; R:115dB |
| Total Harmonic Distortion (THD) | <0.5% |
| Microphone | 1 MEMS voice mic |
| Battery Capacity | 180mAh |
| Charging Time | 2hr |
| Operating Time | Up to 12hr |
| Power Supply | 5V / 500mA–2A rated USB charger |
| Power Port | Type C |
| Product Weight | 34.8g |
Q & A
Q1: Will this work with my TV?
Yes, if your TV has Optical, AUX, or RCA audio output. Aura Loop is designed to work with the included transmitter connected to your TV through one of these ports. Please check your TV has at least one of these outputs before purchase.
Q2: Can I use this with my TV soundbar? Will my TV speakers still have sound?
Aura Loop does not support audio passthrough to a TV soundbar, so the TV soundbar will not play audio when Aura Loop is in use. Whether your TV speakers can play sound at the same time depends on your TV model and audio settings. Some TVs support simultaneous output, while others do not. Please check your TV settings or manufacturer before purchase.
Q3: Is this the same as regular Bluetooth TV headphones?
No. Aura Loop uses Auracast, not classic Bluetooth. It works as a TV listening system with the included transmitter and supports Auracast earbuds and Auracast-enabled hearing aids only. It does not connect to regular Bluetooth headphones or speakers.
Q4: Is setup complicated? Do I need to change TV settings?
Initial setup is required. You'll need to connect the transmitter and select the correct TV audio output. Once set up, daily use is simple. Most sound issues are resolved by choosing the correct TV output and PCM audio format.
Q5: Can I use Aura Loop with my phone? Will it interrupt TV watching?
When used with the transmitter, Aura Loop can stay connected to your TV while also pairing with your phone. Incoming calls or notifications can be heard through the earbuds, and TV audio will resume automatically after the call ends.
Buy Add-ons & Accessories
Aura Loop — Compatibility Checker
Avantree Bluetooth Compatibility Checker
Avantree products are designed for versatility and broad compatibility. However, due to technical limitations, not all devices can work together. We strongly recommend checking compatibility before purchase.
All Bluetooth Devices Checker
(Note: This tool is still under development. 💡 Suggestions are welcome anytime! contact us.)
- La scelta di una selezione comporta l'aggiornamento dell'intera pagina.