AcuEar Pebble 2

50dB Open-Ear Bluetooth Hearing Amplifier with Remote Mic

$135.99 $159.99
Save $24.00
Totale parziale: $135.99

Spedizione e reso gratuiti

  • On‑Demand Hearing Support – A wireless mobile hearing amplifier for people who don’t want to wear hearing aids all day but need clearer sound when it matters.
  • Omni‑Directional Mic + DSP – Built‑in omni mic captures voices naturally while signal processing prioritizes the talker closest to the mic and reduces ambient noise.
  • Normal / Noisy Switch – Toggle modes to suit the environment: everyday conversations or busy places like restaurants and shops.
  • Two Ways to ListenHearing Assist Mode for face‑to‑face conversations; Bluetooth Mode to listen from a phone (calls, voice messages, media) when paired.
  • Simple Controls, Clear Indicators – Big, easy buttons and intuitive LEDs for quick power, pairing, volume, and mode checks.
  • Comfort‑First Wear – Lightweight earpieces designed for extended use when needed, then pop off and store—no 24/7 commitment.
  • Recommended Use: one‑on‑one chats, family gatherings, restaurants, check‑in counters, and other situations where you can place or keep the mic close to the speaker.
    Note: AcuEar Pebble 2 is a personal hearing amplifier for situational use and is not a medical hearing aid.

    Hearing Assist Mode

    • Main Function: Place the case near the talker — the built-in mic picks up voices and streams them directly to your ears.
    • Best For: Shops, banks, restaurants, meetings, family chats, or any noisy environment.
    • Modes: Normal (~40 ms, low delay) or Noisy (~60 ms, filters background noise).
    • Range: Works up to 100 ft (30 m) in open spaces.

    Bluetooth Headphone Mode

    • Use: Pair with your phone, tablet, or TV to take calls, listen to music, podcasts, or videos.
    • Earpiece Mic: Only active in Bluetooth mode for phone calls, not for hearing assist.
    * Microphone Transmitter & Charging Case x1
    * Earphones x1
    * Charging Cable x1
    Setup & Support
    AcuEar Pebble 2

    AcuEar Pebble 2

    $159.99 $135.99

    AcuEar Pebble 2

    $159.99 $135.99

    🔒 You Are Protected.

    Order now with pre-order discount
    60-day free return anytime
    24-month free warranty exchange
    Influence features with your feedback

    Specifications

    🎧 Transmitter & Headphones Set
    Voice Pickup Range Noisy places (restaurant, street, mall): 1-to-1 use, talker within 40 cm of case mic.

    Quiet rooms (office, living room, small meeting room): 3–4 people, mic within 1.5 m, facing talkers.

    Performance depends on noise level and room acoustics.
    Audio Latency 40 ms (Normal) / 76 ms (Noisy)
    Utilized Audio Codecs LC3
    Max Connected Receivers 1
    🎙️ Transmitter Mic
    Bluetooth Version V5.3
    Supported Audio Codecs LC3
    Supported Bluetooth Profiles A2DP v1.3.1
    Built-in Microphone Omnidirectional mic on charging case
    Quantity 1
    Battery Type Lithium-ion polymer
    Charging Time 2.5 hours
    Average Battery Life 10 hours (Hearing Mode)
    Power Supply 5V / 500mA–2A USB charger
    Power Port USB Type-C
    Product Size 107.5 × 64 × 36 mm
    Product Weight 104 g
    🎧 Receiver / Headphones
    Bluetooth Version V5.3
    Supported Audio Codecs LC3, aptX-Adaptive, aptX, SBC
    Supported Bluetooth Profiles HSP V1.2, HFP V1.7.1, AVRCP V1.6, A2DP V1.3.1
    Bluetooth Wireless Range Up to 30 ft / 10 m
    Sound Pressure Level (SPL) 114 dB ± 3 dB
    Speaker Unit Size φ16.2 mm
    Impedance 16 Ω
    Frequency Response 20 Hz – 20 kHz
    Signal-to-Noise Ratio (SNR) >80 dB
    Microphone Type MEMS
    Quantity 2
    Battery Type Lithium-ion polymer
    Battery Capacity 120 mAh
    Charging Time 2.5 hours
    Average Battery Life 10 hours (Hearing Mode) / 18 hours (Bluetooth Mode)
    Standby Time 120 hours
    Product Weight 25.4 g
    Independent Earphones Charger & Table Mic Built-In Controls

    Independent Earphones

    Use a single earphone independently of the other and set different volume levels for each.

    Charger & Table Mic

    The charging case’s built-in mic transmits audio loud & clear to your earphones.

    Built-In Controls

    In BT mode, play / pause, adjust the volume, skip / replay tracks, etc., with the built-in controls.

    Tips & Tricks

    Frequently Asked Questions.

    Do I need to place the case on the table? +
    Yes. The microphone is inside the charging case, not the earpieces. For best clarity, place the case near the person speaking (e.g. at a counter, in a restaurant, or during a meeting).
    Why don’t the earpieces pick up sound directly? +
    The earpiece microphones are only used in Bluetooth Headphone Mode (for calls and voice messages). In Hearing Assist Mode, all pickup is done by the remote mic in the case for clearer, focused voice capture.
    What’s the difference between Normal and Noisy Mode? +
    Normal Mode: Lowest delay (~40 ms), best for quieter or moderate environments.
    Noisy Mode: Slightly longer delay (~60 ms), but filters background noise, making speech clearer in shops, banks, or restaurants.
    Is the AcuEar Pebble 2 open-ear? +
    Yes. The earpieces are open-ear, so you avoid the strong “occlusion effect” of in-ear buds. Comfortable for situational hearing support without feeling blocked.
    Can I also use it as wireless earbuds? +
    Yes. In Bluetooth Headphone Mode, the Pebble 2 pairs with your phone, tablet, or TV. The earpiece microphones then become active for phone calls or voice messages.